Louisiana-Pacific 10-K 2014
Documents found in this filing:
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Annual Report Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934
(Exact name of registrant as specified in its charter)
Securities registered pursuant to Section 12(b) of the Act:
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer as defined in Rule 405 of the Securities Act. Yes ý No ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No ý
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨
Indicate by check mark if the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “accelerated filer,” “large accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (Check one):
Large accelerated filer ý Accelerated filer ¨ Non-accelerated filer ¨ Smaller reporting company ¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act): Yes ¨ No ý
State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter: $2,003,677,256
Indicate the number of shares outstanding of each of the registrant’s classes of common stock as of the latest practicable date: 141,260,223 shares of Common Stock, $1 par value, outstanding as of February 27, 2014.
Documents Incorporated by Reference
Definitive Proxy Statement for 2013 Annual Meeting: Part III
Except as otherwise specified and unless the context otherwise requires, references to “LP”, the “Company”, “we”, “us”, and “our” refer to Louisiana-Pacific Corporation and its subsidiaries.
ABOUT FORWARD-LOOKING STATEMENTS
Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 provide a “safe harbor” for forward-looking statements to encourage companies to provide prospective information about their businesses and other matters as long as those statements are identified as forward-looking and are accompanied by meaningful cautionary statements identifying important factors that could cause actual results to differ materially from those discussed in the statements. This report contains, and other reports and documents filed by us with the Securities and Exchange Commission may contain, forward-looking statements. These statements are or will be based upon the beliefs and assumptions of, and on information available to, our management.
The following statements are or may constitute forward-looking statements: (1) statements preceded by, followed by or that include words like “may,” “will,” “could,” “should,” “believe,” “expect,” “anticipate,” “intend,” “plan,” “estimate,” “potential,” “continue” or “future” or the negative or other variations thereof and (2) other statements regarding matters that are not historical facts, including without limitation, plans for product development, forecasts of future costs and expenditures, possible outcomes of legal proceedings, capacity expansion and other growth initiatives and the adequacy of reserves for loss contingencies.
Factors that could cause actual results to differ materially from those expressed or implied by the forward-looking statements include, but are not limited to the following:
In addition to the foregoing and any risks and uncertainties specifically identified in the text surrounding forward-looking statements, any statements in the reports and other documents filed by us with the Commission that warn of risks or uncertainties associated with future results, events or circumstances identify important factors that could cause actual results, events and circumstances to differ materially from those reflected in the forward-looking statements.
ABOUT THIRD-PARTY INFORMATION
In this report, we rely on and refer to information regarding industry data obtained from market research, publicly available information, industry publications, U.S. government sources and other third parties. Although we believe the information is reliable, we cannot guarantee the accuracy or completeness of the information and have not independently verified it.
Our company, founded in 1973 and headquartered in Nashville, Tennessee, is a leading manufacturer of building products. As of December 31, 2013, we had approximately 4,200 employees. We currently own 21 modern, strategically located facilities in the U.S. and Canada, two facilities in Chile and one facility in Brazil. We also operate facilities through a joint venture, for which we are the exclusive provider of product distribution for North America. Our focus is on delivering innovative, high-quality commodity and specialty building products to retail, wholesale, home building and industrial customers. Our products are used primarily in new home construction, repair and remodeling, and manufactured housing.
In May 2013, we increased our ownership of an OSB facility in British Columbia, Canada with an annual production capacity of 820 million square feet to 100% by purchasing Canfor Corporation’s 50% interest in our former joint venture. In August 2013, we sold our moulding operations and, in December 2013, we sold our 50% interest in U.S. GreenFiber, LLC, a former joint venture with Casella Waste Management Systems, Inc. that produced cellulose insulation.
We operate in four segments: North America Oriented Strand Board (OSB); Siding; Engineered Wood Products (EWP); and South America. In general, our businesses are affected by the level of housing starts; the level of home repairs; changes in industry capacity; changes in the prices we pay for raw materials and energy; changes in foreign exchange rates (primarily the Canadian dollar, Chilean Peso and Brazilian Real); and the availability and cost of financing and changes in other operating costs.
Our OSB segment manufactures and distributes OSB structural panel products.
OSB is an innovative, affordable and environmentally smart product made from wood strands arranged in layers and bonded with resin. OSB serves many of the same uses as plywood, including roof decking, sidewall sheathing and floor underlayment, but can be produced at a significantly lower cost. It is estimated for 2013 that OSB accounted for approximately 61% of the structural panel consumption in North America with plywood accounting for the remainder. We estimate that the overall North American structural panel market (based upon 2013 housing starts) was 28.3 billion square feet with the OSB market comprising an estimated 17.3 billion square feet of this market. Based upon our production in 2013 of 4.1 billion square feet (including OSB produced in our siding segment), we estimate that we account for 24% of the North American OSB market and 14% of the overall North American structural panel market. We believe we have the largest installed capacity and are one of the most efficient producers of OSB in North America.
Our siding offerings fall into two categories: SmartSide® siding products and related accessories; and CanExel siding and accessory products. Our SmartSide® products consist of a full line of wood-based sidings, trim, soffit and fascia. These products have quality and performance characteristics similar to solid wood at more attractive prices due to lower raw material and production costs. Our CanExel siding and accessory product offerings include a number of pre-finished lap and trim products in a variety of patterns and textures.
Additionally, minor amounts of commodity OSB are produced and sold in this segment.
Engineered Wood Products
Our Engineered Wood Products (EWP) segment manufactures and distributes laminated veneer lumber (LVL), I-Joists, laminated strand lumber (LSL) and other related products. This segment also includes the sale of I-Joist produced by our joint venture with Resolute Forest Products (formerly AbitibiBowater) and LVL sold under a contract manufacturing arrangement. We believe that in North America we are one of the top three producers
(including our joint venture production) of I-Joists, LVL and LSL. A plywood mill associated with our LVL operations in British Columbia is also included in this segment.
We believe that our engineered I-joists, which are used primarily in residential and commercial flooring and roofing systems and other structural applications, are stronger, lighter and straighter than conventional lumber joists. Our LVL and LSL are high-grade, value-added structural products used in applications where extra strength and quality is required, such as headers and beams.
Our South American segment manufactures and distributes OSB and siding products in South America and certain export markets. This segment also distributes and sells related products to augment the transition to wood frame construction. We believe we are the only producer of OSB in South America.
Our other products category includes our remaining timber and timberlands, and other minor products, services and closed operations. Prior to their disposition during 2013, this category also included our interest in a joint venture that produced cellulose insulation and our former moulding operations.
Sales, Marketing and Distribution
Our sales and marketing efforts are primarily focused on traditional two-step distribution, professional building products dealers, home centers, third-party wholesale buying groups and other retailers. The wholesale distribution channel includes a variety of specialized and broad-line wholesale distributors and dealers focused primarily on the supply of products for use by professional builders and contractors. The retail distribution channel includes large retail chains catering to the do-it-yourself (DIY) and repair and remodeling markets as well as smaller independent retailers.
We seek to maintain a broad customer base and a balanced approach to national distribution through both wholesale and retail channels. In 2013, our top ten customers accounted for approximately 44% of our sales. Because a significant portion of our sales are from OSB, a commodity product sold primarily on the basis of price and availability, we are not dependent on any one customer. Our principal customers include the following:
Our business is subject to seasonal variances, with demand for many of our products tending to be greater during the building season, which generally occurs in the second and third quarters in North America and the fourth and first quarters in South America. From time to time, we engage in promotional activities designed to stimulate demand for our products, such as reducing our selling prices and providing extended payment terms, particularly at times when demand is otherwise relatively soft. We do this in an effort to better balance our inventory levels with
demand, manage the logistics of our product shipments, allow our production facilities to run efficiently, be competitive, and/or obtain initial orders from customers.
Competitors / Competition
The building products industry is highly competitive. We compete internationally with several thousand forest and building products firms, ranging from very large, fully integrated firms to smaller enterprises that may manufacture only one or a few items. We also compete less directly with firms that manufacture substitutes for wood building products. Some competitors have substantially greater financial and other resources than we do that could, in some instances, give them a competitive advantage over us.
In terms of our commodity OSB, we compete based upon price, quality and availability of products. In terms of our specialty products, including EWP, siding and various value added OSB products, we compete based upon price, quality, and availability of products as well as performance features offered.
Wood fiber is the primary raw material used in most of our operations, and the primary source of wood fiber is timber. The primary end-markets for timber harvested in the U.S. are manufacturers who supply: (1) the housing market, where it is used in the construction of new housing and the repair and remodeling of existing housing; (2) the pulp and paper market; (3) commercial and industrial markets; (4) export markets; and (5) emerging biomass energy production markets. The supply of timber is limited by access to timber and by the availability of timberlands. The availability of timberlands, in turn, is limited by several factors, including forest management policies, alternate uses of land, and loss to urban or suburban real estate development.
In Canada, we harvest enough timber annually under long-term harvest rights with various Canadian governments and other third parties to support our Canadian production facilities.
We purchase approximately 71% of our wood fiber requirements on the open market, through either private cutting contracts or purchased wood arrangements. Our remaining wood fiber requirements (29%) are fulfilled through government contracts, principally in Canada. Because wood fiber is subject to commodity pricing, the cost of various types of timber that we purchase in the market has at times fluctuated greatly due to weather, governmental, economic or other industry conditions. However, our mills are generally located in areas that are in close proximity to large and diverse supplies of timber. Our mills generally have the ability to procure wood fiber at competitive prices from third-party sources.
In addition to wood fiber, we use a significant quantity of various resins in our manufacturing processes. Resin product costs are influenced by changes in the prices of raw materials used to produce resin, primarily petroleum products, as well as competing demand for resin products. Currently, we purchase the majority of our resin from three major suppliers and believe our relationships with those suppliers to be good. However there can be no assurance that pricing or availability of resins will not be impacted based upon competing demand.
While a portion of our energy requirements are generated at our plants through the conversion of wood waste, we also purchase substantial amounts of energy in our operations, primarily electricity and natural gas. Energy prices have experienced significant volatility in recent years, particularly in deregulated markets. We attempt to mitigate our exposure to energy price changes through the selective use of long-term supply agreements.
Our operations are subject to many environmental laws and regulations governing, among other things, discharges of pollutants and other emissions on or into land, water and air, the disposal of hazardous substances or other contaminants, the remediation of contamination and the restoration and reforestation of timberlands. In addition, certain environmental laws and regulations impose liability and responsibility on present and former owners, operators or users of facilities and sites for contamination at such facilities and sites without regard to
causation or knowledge of contamination. Compliance with environmental laws and regulations can significantly increase the costs of our operations and otherwise result in significant costs and expenses. In some cases, plant closures can result in more onerous compliance requirements becoming applicable to a facility or a site. Violations of environmental laws and regulations can subject us to additional costs and expenses, including defense costs and expenses and civil and criminal penalties. We cannot assure you that the environmental laws and regulations to which we are subject will not become more stringent, or be more stringently implemented or enforced, in the future.
During 2012, the U.S. Environmental Protection Agency (EPA) finalized the Clean Air Act pollution standards. We estimate that we will be required to make capital expenditures in the range of $3 million to $13 million over the next six years to comply with such standards.
Our policy is to comply fully with all applicable environmental laws and regulations. We devote significant management attention to achieving full compliance. In addition, from time to time, we undertake construction projects for environmental control equipment or incur other environmental costs that extend an asset’s useful life, improve its efficiency or improve the marketability of certain properties.
Additional information concerning environmental matters is set forth under item 3, Legal Proceedings, and in Note 18 of the Notes to the consolidated financial statements included in item 8 of this report.
We employ approximately 4,200 people, about 575 of whom are members of unions, primarily in Canada, Chile and Brazil. We consider our relationship with our employees generally to be good. While we do not currently anticipate any work stoppage, there can be no assurance that work stoppages will not occur.
We file annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements and other information with the Securities and Exchange Commission (“SEC”). Our SEC filings are available to the public over the Internet at the SEC’s website at http://www.sec.gov. You may also read and copy any document we file at the SEC’s public reference room at 100 F Street, NE., Washington, D.C. 20549. You may obtain information on the operation of the SEC’s public reference room in Washington, D.C. by calling the SEC at 1-800-SEC-0330.
In addition, we will make available our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act through our internet website at http://www.lpcorp.com as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC.
Segment and Price Trend Data
The following table sets forth, for each of the last three years: (1) our production volumes; (2) the estimated average wholesale price of OSB sold in the United States; and (3) our logs procured by source. In addition, information concerning our: (1) consolidated net sales by business segment; (2) consolidated profit (loss) by business segment; (3) identifiable assets by segment; (4) depreciation, amortization and cost of timber harvested; (5) capital expenditures; and (6) geographic segment information is included at Note 26 of the Notes to the consolidated financial statements included in item 8 of this report and information concerning our sales by product line is included in item 7 of this report.
Product Information Summary
For Years Ended December 31
(Dollar amounts in millions, except per unit)
You should be aware that the occurrence of any of the events described in this Risk Factors section and elsewhere in this report or in any other of our filings with the SEC could have a material adverse effect on our business, financial position, results of operations and cash flows. In evaluating us, you should consider carefully, among other things, the risks described below and the matters described in “About Forward-Looking Statements.”
Cyclical industry conditions and commodity pricing have and may continue to adversely affect our financial condition and results of operations. Our operating results reflect the general cyclical pattern of the building products industry. Demand for our products correlates to a significant degree to the level of residential construction activity in North America, which historically has been characterized by significant cyclicality. This cyclicality is influenced by a number of factors, including the supply of new and existing homes on the market, the level of unemployment, longer-term interest rates, and mortgage foreclosure rates. The cyclicality is also influenced by the availability of mortgage financing, which is currently more restrictive than normal and which could be adversely affected by the implementation of one or more proposals to eliminate or reduce the mortgage market roles of or levels of support for government-sponsored enterprises such as Federal National Mortgage Association and the Federal Home Loan Mortgage Corporation. A significant increase in longer-term interest rates, a prolonged decline in the availability of mortgage financing, or the occurrence of other events that reduce levels of residential construction activity could have a material adverse effect on our financial condition, results of operations and cash flows. Our primary product, OSB, and a significant portion of our raw materials are globally traded commodity products. In addition, our products are subject to competition from manufacturers worldwide. Historical prices for our products have been volatile, and we, like other participants in the building products industry, have limited influence over the timing and extent of price changes for our products. Product pricing is significantly affected by the relationship between supply and demand in the building products industry. Product supply is influenced primarily by fluctuations in available manufacturing capacity. Demand is affected by the state of the economy in general and a variety of other factors, including the level of new residential construction activity and home repair and remodeling activity, changes in the availability and cost of mortgage financing and weather conditions. We are not able to predict with certainty market conditions and selling prices for our products. In this competitive environment with so many variables for which we do not control, we cannot assure you that prices for our products will not decline from current levels. A prolonged and severe weakness in the markets for one or more of our principal products, particularly OSB, could seriously harm our financial condition and results of operations and our ability to satisfy our cash requirements, including the payment of interest and principal on our debt.
We have a high degree of product concentration. OSB accounted for about 58%, 57% and 48% of our North American sales in 2013, 2012 and 2011 and we expect OSB sales to continue to account for a substantial portion of our revenues and profits in the future. Concentration of our business in the OSB market further increases our sensitivity to commodity pricing and price volatility. In this competitive environment with so many variables for which we do not control, we cannot assure you that pricing for OSB or our other products will not decline from current levels.
Intense competition in the building products industry could prevent us from increasing or sustaining our net sales and profitability. The markets for our products are highly competitive. Our competitors range from very large, fully integrated forest and building products firms to smaller firms that may manufacture only one or a few types of products. We also compete less directly with firms that manufacture substitutes for wood building products. Many of our competitors have greater financial and other resources than we do, and certain of the mills operated by our competitors may be lower-cost producers than the mills operated by us.
Our results of operations may be harmed by potential shortages of raw materials and increases in raw material costs. The most significant raw material used in our operations is wood fiber. We currently obtain about 71% of our wood fiber requirements in the open market. Wood fiber is subject to commodity pricing, which fluctuates on the basis of market factors over which we have no control. In addition, the cost of various types of wood fiber that we purchase in the market has at times fluctuated greatly because of governmental, economic or industry conditions, and may be affected by increased demand resulting from initiatives to increase the use of
biomass materials in the production of heat, power, biobased products and biofuels. In addition to wood fiber, we also use a significant quantity of various resins in our manufacturing processes. Resin product costs are influenced by changes in the prices or availability of raw materials used to produce resins, primarily petroleum products, as well as demand for and availability of resin products. Selling prices of our products have not always increased in response to raw material cost increases. We are unable to determine to what extent, if any, we will be able to pass any future raw material cost increases through to our customers through product price increases. Our inability to pass increased costs through to our customers could have a material adverse effect on our financial condition, results of operations and cash flows.
Many of the Canadian forestlands from which we obtain wood fiber also are subject to the constitutionally protected treaty or common-law rights of the aboriginal peoples of Canada. Most of British Columbia is not covered by treaties and, as a result, the claims of British Columbia’s aboriginal peoples relating to forest resources are largely unresolved, although many aboriginal groups are actively engaged in treaty discussions with the governments of British Columbia and Canada. Final or interim resolution of claims brought by aboriginal groups are expected to result in additional restrictions on the sale or harvest of timber and may increase operating costs and affect timber supply and prices in Canada.
We depend on our senior management team and other key employees, and significant attrition within our management team could adversely affect our business. Our success depends in part on our ability to attract, retain and motivate senior management and other key employees. Achieving this objective may be difficult due to many factors, including fluctuations in global economic and industry conditions, competitors’ hiring practices, cost reduction activities, and the effectiveness of our compensation programs. Competition for qualified personnel can be very intense. We must continue to recruit, retain and motivate senior management and other key employees sufficient to maintain our current business and support our future projects. A loss of any such personnel, or the inability to recruit and retain qualified personnel in the future, could have an adverse effect on our business, financial condition and results of operations.
Our operations require substantial capital. Capital expenditures for expansion or replacement of existing facilities or equipment or to comply with future changes in environmental laws and regulations may be substantial. Although we maintain our production equipment with regular periodic and scheduled maintenance, we cannot assure you that key pieces of equipment in our various production processes will not need to be repaired or replaced or that we will not incur significant additional costs associated with environmental compliance. The costs of repairing or replacing such equipment and the associated downtime of the affected production line could have a material adverse effect on our financial condition, results of operations and cash flow. If for any reason we are unable to provide for our operating needs, capital expenditures and other cash requirements on economic terms, we could experience a material adverse effect on our business, financial condition, results of operations and cash flows.
Our pension and health care costs are subject to numerous factors which could cause these costs to change. We have defined benefit pension plans covering substantially all U.S. and Canadian employees. We provide retiree health care benefits to certain of our U.S. salaried and certain hourly employees. Our pension costs are dependent upon numerous pension plan provisions that are subject to interpretations and factors resulting from actual plan experience and assumptions of future experience. Pension plan assets are primarily made up of equity and fixed income investments. Fluctuations in actual equity market returns; changes in general interest rates and changes in the number of retirees may result in increased pension costs in future periods. Likewise, changes in assumptions regarding current discount rates and expected rates of return on plan assets could also change pension and health care costs. We are subject to market risk on pension plan assets as well as discount rates on long-term obligations. Significant adverse changes in the factors affecting our pension and health care costs could adversely affect our cash flows, financial condition and results of operations.
Our pension plans are currently underfunded, and over time we may be required to make cash payments to the plans, reducing the cash available for our business. We record a liability associated with our pension plans equal to the excess of the benefit obligation over the fair value of plan assets. The benefit liability recorded under the provisions of Accounting Standards Codification (ASC) 715, “Compensation—Retirement Benefits,” at December 31, 2013 was $51.8 million. Although we expect to contribute $2.0 million to $5.0 million to our plans in
2014, we continually reassess the amount and timing of any discretionary contributions. Over the next several years we may make significant contributions to the plans. The amount of such contributions will depend upon a number of factors, principally the actual earnings and changes in values of plan assets and changes in interest rates.
We depend on third parties for transportation services and increases in costs and the availability of transportation could materially and adversely affect our business and operations. Our business depends on the transportation of a large number of products, both domestically and internationally. We rely primarily on third parties for transportation of the products we manufacture and/or distribute as well as for delivery of our raw materials. In particular, a significant portion of the goods we manufacture and raw materials we use are transported by railroad or trucks, which are highly regulated. If any of our third-party transportation providers were to fail to deliver the goods we manufacture or distribute in a timely manner, we may be unable to sell those products at full value or at all. Similarly, if any of these providers were to fail to deliver raw materials to us in a timely manner, we may be unable to manufacture our products in response to customer demand. In addition, if any of these third parties were to cease operations or cease doing business with us, we may be unable to replace them at reasonable cost. Any failure of a third-party transportation provider to deliver raw materials or finished products in a timely manner could harm our reputation, negatively affect our customer relationships and have a material adverse effect on our financial condition and results of operations. In addition, an increase in transportation rates or fuel surcharges could materially and adversely affect our sales and profitability.
We are subject to significant environmental regulation and environmental compliance expenditures and liabilities. Our businesses are subject to many environmental laws and regulations, particularly with respect to discharges of pollutants and other emissions on or into land, water and air, and the disposal and remediation of hazardous substances or other contaminants and the restoration and reforestation of timberlands. Compliance with these laws and regulations is a significant factor in our business. We have incurred and expect to continue to incur significant expenditures to comply with applicable environmental laws and regulations. Moreover, some or all of the environmental laws and regulations to which we are subject could become more stringent in the future. Our failure to comply with applicable environmental laws and regulations and permit requirements could result in civil or criminal fines or penalties or enforcement actions, including regulatory or judicial orders enjoining or curtailing operations or requiring corrective measures, installation of pollution control equipment or remedial actions.
Some environmental laws and regulations impose liability and responsibility on present and former owners, operators or users of facilities and sites for contamination at such facilities and sites without regard to causation or knowledge of contamination. In addition, we occasionally evaluate various alternatives with respect to our facilities, including possible dispositions or closures. Investigations undertaken in connection with these activities may lead to discoveries of contamination that must be remediated, and closures of facilities may trigger compliance requirements that are not applicable to operating facilities. Consequently, we cannot assure you that existing or future circumstances or developments with respect to contamination will not require significant expenditures by us.
We are involved in various environmental matters, product liability and other legal proceedings. The outcome of these matters and proceedings and the magnitude of related costs and liabilities are subject to uncertainties. The conduct of our business involves the use of hazardous substances and the generation of contaminants and pollutants. In addition, the end-users of many of our products are members of the general public. We currently are or from time to time in the future may be involved in a number of environmental matters and legal proceedings, including legal proceedings involving anti-trust, warranty or non-warranty product liability claims, negligence and other claims, including claims for wrongful death, personal injury and property damage alleged to have arisen out of the use by others of our or our predecessors’ products or the release by us or our predecessors of hazardous substances. Environmental matters and legal matters and proceedings, including class action settlements relating to certain of our products, have in the past caused and in the future may cause us to incur substantial costs. We have established contingency reserves in our consolidated financial statements with respect to the estimated costs of existing environmental matters and legal proceedings to the extent that our management has determined that such costs are both probable and reasonably estimable as to amount. However, such reserves are based upon various estimates and assumptions relating to future events and circumstances, all of which are subject to inherent uncertainties. We regularly monitor our estimated exposure to environmental and litigation loss contingencies and, as additional information becomes known, may change our estimates significantly. However, no estimate of the range of any such
change can be made at this time. We may incur costs in respect of existing and future environmental matters and legal proceedings as to which no contingency reserves have been established. We cannot assure you that we will have sufficient resources available to satisfy the related costs and expenses associated with these matters and proceedings.
Settlements of tax exposures may exceed the amounts we have established for known estimated tax exposures. We maintain reserves for known estimated tax exposures in federal, state and international jurisdictions and uncertain tax positions. Significant income tax exposures may include potential challenges to intercompany pricing and loans, the treatment of financing, acquisition and disposition transactions, the use of hybrid entities and other matters. These exposures are settled primarily through the closure of audits with the taxing jurisdictions and, on occasion, through the judicial process, either of which may produce a result inconsistent with past estimates. We believe that we have established appropriate reserves for estimated exposures; however, if actual results differ materially from our estimates we could experience a material adverse effect on our financial condition, results of operations and cash flows. In addition, our deferred tax liabilities include substantial amounts related to installment sales of timber lands in 1998 and 2003 for which we have previously monetized most of the installment receivable. As a result of these monetizations, we will be required to fund these liabilities from sources other than such installments, potentially including such tax loss and credit carryovers as may then be available.
Fluctuations in foreign currency exchange rates could result in currency exchange losses and reductions in stockholder’s equity. A significant portion of our operations are conducted through foreign subsidiaries. The functional currency for our Canadian subsidiary is the U.S. dollar. The financial statements of this foreign subsidiary are remeasured into U.S. dollars using the historical exchange rate for property, plant and equipment, timber and timberlands, equity and certain other non-monetary assets and liabilities and related depreciation and amortization on these assets and liabilities. These transaction and translation gains or losses are recorded in foreign exchange gains (losses) in the income statement. The functional currency of our Chilean subsidiary is the Chilean peso and the functional currency of our Brazililian subsidiary is the Brazilian real. Translation adjustments, which are based upon the exchange rate at the balance sheet date for assets and liabilities and the weighted average rate for the income statement, are recorded in the Accumulated Comprehensive Income (Loss) section of Stockholders’ Equity. Therefore, changes in the Canadian dollar, the Chilean peso or the Brazilian real relative to the U.S. dollar may have a material adverse effect on our financial condition and results of operations.
Our ability to service our indebtedness, to refinance our indebtedness or to fund our other liquidity needs is subject to various risks. Our ability to make scheduled payments on and to refinance our indebtedness depends on and is subject to our financial and operating performance, which in turn is affected by general and regional economic, financial, competitive, business and other factors, including the availability of financing in the banking and capital markets as well as the other risks described herein. In particular, demand for our products correlates to a significant degree to the level of residential construction activity in North America, which historically has been characterized by significant cyclicality. Over the last several years, housing starts remained below “normal” levels. There can be no assurance as to when, or if the housing market, will rebound to “normal levels”. Accordingly, we cannot assure you that our business will generate sufficient cash flows from operations or that future borrowings will be available to us in an amount sufficient to enable us to service our debt, to refinance our debt or to fund our other liquidity needs. If we are unable to service our debt obligations or to fund our other liquidity needs, we could be forced to curtail our operations, reorganize our capital structure or liquidate some or all of our assets in a manner that could cause the holders of our securities to experience a partial or total loss of their investment in us.
We have not independently verified the results of third-party research or confirmed assumptions or judgments upon which it may be based, and the forecasted and other forward-looking information contained therein is subject to inherent uncertainties. We refer in this report and other documents that we file with the SEC to historical, forecasted and other forward-looking information published by sources such as RISI (Resource Information Systems, Inc.), FEA (Forest Economic Advisors, LLC), Random Lengths and the U.S. Census Bureau that we believe to be reliable. However, we have not independently verified this information and, with respect to the forecasted and forward-looking information, have not independently confirmed the assumptions and judgments upon which it is based. Forecasted and other forward looking information is necessarily based on assumptions regarding future occurrences, events, conditions and circumstances and subjective judgments relating to various matters, and is
subject to inherent uncertainties. Actual results may differ materially from the results expressed or implied by, or based upon, such forecasted and forward-looking information.
Initiatives to Upgrade Our Information Technology Infrastructure Involve Many Risks. We regularly implement business process improvement initiatives to optimize our performance. Our current initiatives include plans to further standardize the business processes and technology that support our strategies through implementation of an new software solution over the next few years. We may experience difficulties as we transition to these new or upgraded systems and processes, including loss of data and decreases in productivity as our personnel become familiar with new systems. In addition, transitioning to these new or upgraded systems requires significant capital investments and personnel resources. Difficulties in implementing new or upgraded information systems or significant system failures could disrupt our operations and have a material adverse effect on our business, financial condition, results of operations or cash flows. In addition, we will experience significant changes in our internal controls over financial reporting as our implementation progresses. If we are unable to manage these changes successfully, our ability to timely and accurately process transactions and report our results of operations could be adversely affected.
Our proposed acquisition of Ainsworth may intensify our exposure to existing risks and expose us to new risks. Ainsworth (Ainsworth Lumber Co. Ltd.) is exposed to substantially all of the risks to which we are currently exposed, as well as additional risks that arise from its specific circumstances. As a result, the completion of our proposed acquisition of Ainsworth will both intensify our exposure to existing risks (including those associated with our high degree of product concentration in OSB, demands on our senior management team and other key employees, capital needs and fluctuations in the exchange rate between the Canadian dollar and the U.S. dollar) and expose us to new risks. In addition, because the purchase price that we are obligated to pay Ainsworth shareholders consists substantially of a fixed amount of cash denominated in Canadian dollars and a fixed number of shares of LP common stock, we are exposed to risks associated with a potential decline in Ainsworth’s enterprise value as well as a potential strengthening of the Canadian dollar, and will pay greater value to the extent of any appreciation in the value of shares of LP common stock prior to the completion of the acquisition. The completion of the acquisition of Ainsworth is subject to specified conditions, including the receipt of certain regulatory approvals. The relevant governmental authorities may impose conditions on those approvals that could adversely affect the business, financial condition and results of operations of the combined enterprise. In addition, there can be no assurance that the combined enterprise will not experience a reduction in its allocated cutting rights under governmental tenures. The uncertainties regarding whether, when and the terms upon which the conditions to the acquisition will be satisfied may cause Ainsworth’s customers, suppliers and other business partners to delay, defer or otherwise alter decisions and approaches regarding Ainsworth and, together with uncertainties regarding post-acquisition staffing requirements and roles, may adversely affect Ainsworth’s ability to attract or retain key management personnel. In addition, the completion of the acquisition will involve the integration of companies that previously operated independently and will present a number of challenges (including the integration of operations, systems and
personnel) and risks (including possible unanticipated costs and liabilities, diversion of management’s attention and loss of key employees). Difficulties encountered in the transition and integration processes could have an adverse effect on the business, financial condition and results of operations of the combined enterprise and on the benefits sought to be realized from the acquisition.
ITEM 2. Properties
Information regarding our principal properties and facilities is set forth in the following tables. Information regarding production capacities is based on normal operating rates and normal production mixes under current market conditions, taking into account known constraints such as log supply. Market conditions, fluctuations in log supply, and the nature of current orders may cause actual production rates and mixes to vary significantly from the production rates and mixes shown.
ORIENTED STRAND BOARD
Oriented Strand Board Panel Plants
11 plants—5,775 million square feet annual capacity, 3/8” basis
Siding and Specialty Plants
6 plants—1,320 million square feet annual capacity, 3/8” basis
ENGINEERED WOOD PRODUCTS
1 plant—80 million lineal feet annual capacity
2 plants—9,400 thousand cubic feet annual capacity
1 plant—7,000 thousand cubic feet annual capacity
SOUTH AMERICAN OPERATIONS
3 plants—680 million square feet annual capacity. 3/8” basis
CANADIAN TIMBERLAND LICENSE AGREEMENTS
We also have timber-cutting rights on 12,621 acres on government and privately owned timberlands in the U.S.
Our Canadian subsidiary has arrangements with four Canadian provincial governments which give our subsidiary the right to harvest a volume of wood off public land from defined forest areas under supply and forest management agreements, long-term pulpwood agreements, and various other timber licenses. The acreage noted above is the gross amount of the licenses and is not reflective of the amount of timber acreage that we currently manage. We also obtain wood from private parties in certain cases where the provincial governments require us to obtain logs from private parties prior to harvesting from the licenses to meet our raw materials needs.
ITEM 3. Legal Proceedings
Certain environmental matters and legal proceedings are discussed below.
We are involved in a number of environmental proceedings and activities, and may be wholly or partially responsible for known or unknown contamination existing at a number of other sites at which we have conducted operations or disposed of wastes. Based on the information currently available, management believes that any fines, penalties or other costs or losses resulting from these matters will not have a material adverse effect on our financial position, results of operations, cash flows or liquidity.
On July 31, 2009, LP filed suit in the United States District Court for the Northern District of California captioned, Louisiana Pacific Corporation v. Money Market 1 Institutional Investment Dealer; Merrill Lynch & Co.,
Inc.; Merrill Lynch, Pierce, Fenner & Smith Incorporated; and Deutsche Bank Securities Inc. (Civil Action No.09cv3529). Merrill Lynch caused this case to be transferred to the United States District Court for the Southern District of New York (Civil Action No. 09 MD 2030) where Merrill Lynch had multiple similar cases pending as a result of a Multi-District Litigation Panel ruling. This matter arose out of LP's acquisition of certain ARS structured and underwritten by Merrill Lynch and Deutsche Bank with an approximate par value of $145.9 million. In the lawsuit, LP alleges that the defendants made misrepresentations and omissions of material facts in connection with the issuance of and the auctions for the ARS which constitute a violation of both state and federal securities laws, as well as common law fraud. LP seeks recovery of compensatory damages, rescission of the purchase of the securities at par value, consequential damages, punitive damages, attorneys' fees and any other damages the court deems appropriate under the circumstances.
On February 15, 2012, the Court granted Merrill Lynch's motion to dismiss the case against Merrill Lynch. LP is currently appealing this decision. Cases against MM1 remain pending in the Northern District of California and the Southern District of New York. LP is seeking default judgement against MM1 in both cases.
On November 30, 2012, we entered into a settlement agreement and mutual release with Deutsche Bank Securities Inc, (DBSI) relating to the case against DBSI. Pursuant to the agreement, DBSI, without admitting any liability or wrong-doing, paid to us the sum of $20 million, we dismissed the legal proceedings against DBSI with prejudice, and we and DBSI released the other from all claims and liabilities arising out of the sale and purchase of the auction rate securities and the related legal proceedings.
HARDBOARD TRIM LITIGATION
We were named in four putative class action lawsuits filed against us in United States District Courts during the first quarter of 2012 related to non-treated hardboard trim product formerly manufactured at our Roaring River, North Carolina hardboard plant: Brown v. Louisiana-Pacific Corporation., Case No. 4:12-CV-00102-RP-TJS (S.D. Iowa) (filed March 8, 2012, as a state-wide putative class); Holbrook v. Louisiana-Pacific Corporation, et al., Case No. 3:12-CV-00484-JGC (N.D. Ohio) (filed February 28, 2012, as a state-wide putative class); Bristol Village Inc. v. Louisiana-Pacific Corporation, et al., Case No. 1:12-CV-00263 (W.D.N.Y.) (filed March 30, 2012, as a state-wide putative class or, alternatively, as a nation-wide putative class) and Prevett v. Louisiana-Pacific, Case No. 6:12-CV-348-ORL-18-KRS (M.D. Fla) (filed March 5, 2012, as a state-wide putative class). A fifth lawsuit, Eugene Lipov v. Louisiana-Pacific, Case 1:12-CV-00439- JTN (W.D. Mich) (filed May 3, 2012) was filed as a statewide putative class action in the second quarter of 2012. These lawsuits follow two state-wide putative class action lawsuits previously filed against LP in United States District Courts:; Hart, et al. v. Louisiana-Pacific Corp., Case No. 2:08-CV-00047 (E.D.N.C.). and Ellis, et al. v. Louisiana-Pacific Corp., Case No. 3:11-CV-191 (W.D.N.C.) The Hart case was certified by the District Court as a class action on July 15, 2011.
Plaintiffs moved to combine pretrial matters through a Multidistrict Litigation (MDL) motion, filed as In Re: Louisiana-Pacific Corporation Trimboard Siding Marketing, Sales Practice and Products Liability Litigation MDL No. 2366 (U.S. Judicial Panel on Multidistrict Litigation) seeking to transfer all cases to the Eastern District of North Carolina. Louisiana-Pacific objected to the MDL motion and on June 11, 2012, the MDL Panel denied plaintiffs Motion to Transfer.
Subsequently, the Holbrook case was dismissed by the District Court on August 29, 2012 and has been appealed by the plaintiffs to the United States Court of Appeals for the Sixth Circuit. The Court of Appeals upheld the dismissal on all counts except the express warranty. The Ellis case was dismissed in its entirity by the District Court, and affirmed by the United States Court of Appeals for the Fourth Circuit on November 2, 2012. The Prevett v. Louisiana Pacific lawsuit was voluntarily dismissed by the plaintiffs on May 31, 2012. This lawsuit was replaced by Riley v. Louisiana-Pacific, Case No. 6:12-CV-00837-18 (M.D. Fla) (filed June 4, 2012 as a state-wide putative class). The Riley matter was voluntarily dismiss by the plaintiffs on December 17, 2013. The Lipov case was voluntarily dismissed by the plaintiffs on November 27, 2013. On August 30, 2013, the District Court in the Hart case decertified the class and granted summary judgment on the claims brought by the individual plantiffs dismissing the entire case. The plaintiff’s have appealed the dismissal and decertification to the United States Court of Appeals for the Fourth Circuit. Hart was the only case out of the eight lawsuits filed that was at one time certified as a class action.
The plaintiffs in these lawsuits were seeking to certify classes consisting of all persons that own structures within the respective states in which the lawsuit were filed (or, in some cases, within the United States) on which the hardboard trim in question is installed. The plaintiffs seek unspecified damages and injunctive and other relief under various state law theories, including negligence, violations of consumer protection laws, and breaches of implied and express warranties, fraud, and unjust enrichment. While some individual owners of structures within the putative classes may have valid warranty claims, we believe that the claims asserted on a class basis are without merit and we intend to defend these matters vigorously. We have established warranty reserves for the hardboard trim in question pursuant to our normal business practices, and we do not believe that the resolution of these lawsuits will have a material effect on our financial condition, results of operations, cash flows or liquidity.
LP is party to other legal proceedings. Based on the information currently available, LP believes that the resolution of such proceedings will not have a material adverse effect on its financial position, results of operations, cash flows or liquidity.
We maintain reserves for the estimated cost of the legal and environmental matters referred to above. However, as with any estimate, there is uncertainty of predicting the outcomes of claims and litigation and environmental investigations and remediation efforts that could cause actual costs to vary materially from current estimates. Due to various uncertainties, we cannot predict to what degree actual payments will exceed the recorded liabilities related to these matters. However, it is possible that, in either the near term or the longer term, revised estimates or actual payments will significantly exceed the recorded liabilities.
For information regarding our financial statement reserves for the estimated costs of the environmental and legal matters referred to above, see Note 18 of the Notes to financial statements included in item 8 in this report.
ITEM 4. Mine Safety Disclosures
The common stock of LP is listed on the New York Stock Exchange with the ticker symbol “LPX.” The Dow-Jones newspaper quotations symbol for the common stock is “LaPac.” Information regarding the high and low sales prices for the common stock for each quarter of the last two years is as follows:
As of February 27, 2014, there were approximately 7,242 holders of record of our common stock. No dividends were paid in 2013 or 2012. Our ability to pay dividends in the future is subject to limitations set forth in the agreement governing our bank credit facility and the indenture governing our Senior Notes due in 2020.
ISSUER PURCHASES OF EQUITY SECURITIES
The following graph compares the total cumulative return to investors, including dividends paid (assuming reinvestment of dividends) and appreciation or depreciation in stock price, from an investment in LP Common Stock for the period December 31, 2008 through December 31, 2013, to the total cumulative return to investors from the Standard & Poor’s 500 Stock Index and the Standard & Poor’s Paper and Forest Products Index for the same period. Stockholders are cautioned that the graph shows the returns to investors only as of the dates noted and may not be representative of the returns for any other past or future period.
ITEM 6. Selected Financial Data
ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Our products are used primarily in new home construction, repair and remodeling, and manufactured housing. We also market and sell our products in light industrial and commercial construction and we have a modest export business. Our manufacturing facilities are primarily located in the U.S. and Canada, but we also operate two facilities in Chile and one facility in Brazil.
To serve these markets, we operate in four segments: North America Oriented Strand Board (OSB); Siding; Engineered Wood Products (EWP); and South America. OSB is the most significant segment, accounting for 51% of continuing sales in 2013, 48% in 2012 and 41% in 2011.
OSB is sold as a commodity for which sales prices fluctuate daily based on market factors over which we have little or no control. We cannot predict whether the prices of our products will remain at current levels, increase or decrease in the future.
Planned Acquisition of Ainsworth Lumber Co. Ltd.
On September 4, 2013, LP entered into an Arrangement Agreement (the “Arrangement Agreement”) with Ainsworth Lumber Co. Ltd., a British Columbia corporation (“Ainsworth”), providing an arrangement under British Columbia law whereby a wholly owned subsidiary of the Company will acquire all of the outstanding shares of Ainsworth capital stock in exchange for 0.114 shares of LP common stock (“LP Shares”) and C$1.94 in cash per Ainsworth common share (“Ainsworth Shares”) on the terms and subject to the conditions set forth therein (the “Transaction”). Although the Arrangement Agreement provides for Ainsworth shareholders to elect among cash consideration, share consideration and mixed consideration, proration provisions will ensure that the aggregate amounts of cash and LP Shares issued in the Transaction are fixed at approximately C$467 million and 27.5 million LP Shares, respectively.
The requisite approvals of the Transaction by Ainsworth shareholders and the Supreme Court of British Columbia were obtained on October 29, 2013 and October 31, 2013, respectively. As of the date of this report, the consummation of the Transaction remains subject to other closing conditions, including the expiration or termination of the waiting period under the HSR Act and the receipt of other regulatory approvals and clearances, including under the Canadian Competition Act and the Investment Act of Canada. LP and Ainsworth have agreed to endeavor to cause all closing conditions (including the receipt of regulatory approvals) to be satisfied, which under certain circumstances could require the taking of actions that could adversely affect the value of the Transaction to us.
On February 12, 2014, LP and Ainsworth entered into timing agreements with each of the Canadian Competition Bureau (the "CCB") and the Antitrust Division of the U.S. Department of Justice (the "DOJ") pursuant to which LP and Ainsworth agreed, subject to certain conditions, that they will not consummate the Transaction before March 13, 2014 without the consent of the CCB and the DOJ. This action followed the receipt by each of LP and Ainsworth of (a) a "supplementary information request" for additional information and documents from the CCB and (b) a "second request" for additional information from the DOJ in connection with the Transaction.
In connection with the entry into the timing agreements, LP and Ainsworth also amended the Arrangement Agreement to extend the outside date for completion of the Transaction from March 4 to April 18, 2014. The Arrangement Agreement permits either party to extend the outside date if required to obtain certain regulatory approvals.
The Arrangement Agreement contains certain termination rights for each of LP and Ainsworth. Either party may terminate the Arrangement Agreement if: (i) the parties mutually agree; (ii) the Transaction has not been consummated by April 18, 2014 (subject to extension in certain circumstances); (iii) a governmental authority issues a law or order prohibiting the Transaction; (iv) the other party materially breaches its representations, warranties or
covenants such that the applicable closing condition would not to be satisfied; or (v) the other party has incurred a Material Adverse Effect (as defined in the Arrangement Agreement).
We expect to fund the purchase price payable in the Transaction and related fees and expenses through a combination of cash on hand at LP and Ainsworth and borrowings under our revolving credit facility.
On October 17, 2013, Ainsworth issued a press release announcing that it had received the requisite consents in connection with its consent solicitation (the "Consent Solicitation") from holders of Ainsworth's 7.5% Senior Secured Notes due 2017 (the "Notes") . The press release also announced that Ainsworth has entered into a supplemental indenture relating to the Notes, which modified certain definitions in the indenture relating to the Notes (the "Indenture") so that the consummation of the Transaction pursuant to the Arrangement Agreement, and the designation by LP of members of Ainsworth’s board of directors upon and after the consummation of the Transaction, will not constitute a “Change of Control” under the Indenture and Ainsworth will not be required to make a “Change of Control Offer” under the Indenture in connection with the Transaction. Subject to the satisfaction or waiver of the conditions set forth in the solicitation statement distributed by Ainsworth to holders of the Notes, LP will make the consent payments contemplated thereby as and when they become due. Promptly following the consummation of the Transaction, LP will unconditionally guarantee the prompt payment and performance of the obligations of Ainsworth under the Indenture and the Notes.
The Transaction is expected to have a material effect on LP’s consolidated financial position, results of operations and cash flows. For additional information, see the Ainsworth Lumber Co. Ltd. Notice of Special Meeting and Management Proxy Circular furnished as Exhibit 99.1 to LP's Current Report on Form 8-K dated September 30, 2013.
Factors Affecting Our Results
Revenues and Operating Costs.
We derive our revenues from sales of our products. The unit volumes of products sold and the prices at which sales are made determine the amount of our revenues. These volumes and prices are affected by the overall level of demand for, and supply of, products of the type we sell and comparable or substitute products, and by competitive conditions.
Our operating results reflect the relationship between the amount of our revenues and our costs of production and other operating costs and expenses. Our costs of production are affected by, among other factors, costs of raw materials (primarily wood fiber and various petroleum-based resins) and energy costs, which in turn are affected by the overall market supply of and demand for these manufacturing inputs.
Demand for Building Products
Demand for our products correlates to a significant degree to the level of residential construction activity in North America, which historically has been characterized by significant cyclicality. This activity can be further delineated into three areas: (1) new home construction; (2) repair and remodeling; and (3) manufactured housing.
New Home Construction. Demand for our products correlates to a significant degree to the level of new home construction activity in North America, which historically has been characterized by significant cyclicality. The U.S. Census Bureau reported that actual single and multi-family housing starts in 2013 were about 18% higher than 2012, which were about 29% higher than such housing starts in 2011. However when comparing 2013 housing starts to the average of the last ten years as reported by the U.S. Census Bureau, 2013 housing starts were about 20% lower than that average. We believe that the reduced level of building is due to the continued high levels of unemployment, delayed household formations due to the sluggish economy, foreclosure activity and a more restrictive mortgage market.
While near term residential construction is constrained in the U.S., positive long-term fundamentals exist. Increased immigration, the changing age distribution of the population, the high number of adults living with their parents and historically low interest rates are expected to lead to more household formations. The chart below, which
is based on data published by U.S. Census Bureau, provides a graphical summary of new housing starts for single and multi-family in the U.S. showing actual and rolling five and ten year averages for housing starts in thousands.
Repair and Remodeling. Demand for building materials to support home improvement projects is largely tied to the size and age of the existing housing stock in North America and consumer confidence. In this regard, the 1970s and 1980s had some of the highest levels of building activity. This puts these homes at an age of approximately 30-40 years, which has been shown to be consistent with the highest per home expenditure rate on repair and remodeling. With the rise in the number and scale of home improvement stores in North America, individuals now have ready and convenient access to obtain the building materials needed for repair and remodeling, as well as increased access to installation services.
Manufactured Housing. Over the last several years, manufactured housing has suffered. There are several factors that have led to the decline in the number of manufactured housing units produced, including a lack of available financing, increased ability of potential customers to purchase site-built starter homes and financial difficulties at some of the larger manufactured housing producers.
Supply of Building Products
OSB is a commodity product, and it is, along with all of our products, subject to competition from manufacturers worldwide. Product supply is influenced primarily by fluctuations in available manufacturing capacity and imports. According to FEA (Forest Economic Advisors, LLC), total North American OSB annual production capacity is projected to increase by approximately 2.6 billion square feet in the period from 2014 to 2018 while plywood production capacity is projected to increase by 0.2 billion square feet for the same period. According to FEA, OSB accounted for approximately 65% of North American structural panel production capacity in 2013, with plywood accounting for the remainder. Going forward, it is expected that OSB will continue to capture market share from plywood. FEA forecasts, as of December 2013, that OSB will comprise approximately 67% of the
structural panel market by 2018. The chart below, which is based on data and forecasts published by FEA, depicts past and forecasted North America structural wood production capacities in billions of square feet.
Putting Demand and Supply Together
As noted above, demand for building products is influenced by the general economy, demographics and need for housing. In the case of OSB, generally, lower demand coupled with higher production capacity will result in lower pricing. The chart below, as calculated by FEA (as of December 2013), shows the demand capacity ratio (demand divided by supply) for OSB in 2010 through 2013 as well as FEA’s forecast through 2018 based upon estimated future demand and supply.
Historical prices for our products have been volatile, and we, like other participants in the building products industry, have limited influence over the timing and extent of price changes for our products. The estimated average North Central wholesale price for OSB (per thousand square feet 7/16” basis) from 2007 through 2013, as published by Random Lengths, an industry publication, is presented below. FEA’s forecast (as of December 2013) for average North Central wholesale pricing for OSB (per thousand square feet 7/16” basis) through 2018 is also shown.
Implementation of System Upgrade
During 2012, we conducted a thorough review of our business to assess our current information systems. After extensive study and analysis, we determined that a system upgrade was required. We do anticipate that this initial system upgrade will provide us benefits in terms of reporting and data analysis in addition to upgrading our aging systems. We anticipate the cost of implementation, both capital and expense, to be approximately $30 million which will consist primarily of software and hardware costs, system integration costs, labor costs, and data migration. We anticipate completing the first stage of the systems upgrade in early 2014 and will then embark on further enhancements.
CRITICAL ACCOUNTING POLICIES AND SIGNIFICANT ESTIMATES
A discussion of our significant accounting policies and significant accounting estimates and judgments is presented in Note 1 of the Notes to the financial statements in item 8 of this report. Throughout the preparation of the financial statements, we employ significant judgments in the application of accounting principles and methods. These judgments are primarily related to the assumptions used to arrive at various estimates. For 2013, these significant accounting estimates and judgments include:
Legal Contingencies. Our estimates of loss contingencies for legal proceedings are based on various judgments and assumptions regarding the potential resolution or disposition of the underlying claims and associated costs. In making judgments and assumptions regarding legal contingencies for ongoing class action settlements, we consider, among other things, discernible trends in the rate of claims asserted and related damage estimates and information obtained through consultation with statisticians and economists, including statistical analysis of potential outcomes based on experience to date and the experience of third parties who have been subject to product-related claims judged to be comparable. Due to the numerous variables associated with these judgments and assumptions, both the precision and reliability of the resulting estimates of the related loss contingencies are subject to substantial uncertainties. We regularly monitor our estimated exposure to these contingencies and, as additional information becomes known, may change our estimates significantly.
Environmental Contingencies. Our estimates of loss contingencies for environmental matters are based on various judgments and assumptions. These estimates typically reflect judgments and assumptions relating to the probable nature, magnitude and timing of required investigation, remediation and/or monitoring activities and the probable cost of these activities, and in some cases reflect judgments and assumptions relating to the obligation or willingness and ability of third parties to bear a proportionate or allocated share of the cost of these activities, including third parties who purchased assets from us subject to environmental liabilities. We consider the ability of third parties to pay their apportioned cost when developing our estimates. In making these judgments and assumptions related to the development of our loss contingencies, we consider, among other things, the activity to date at particular sites, information obtained through consultation with applicable regulatory authorities and third-party consultants and contractors and our historical experience at other sites that are judged to be comparable. Due to the numerous variables associated with these judgments and assumptions, and the effects of changes in governmental regulation and environmental technologies, both the precision and reliability of the resulting estimates of the related contingencies are subject to substantial uncertainties. We regularly monitor our estimated exposure to environmental loss contingencies and, as additional information becomes known, may change our estimates significantly. At December 31, 2013, we excluded from our estimates approximately $2.1 million of potential environmental liabilities that we estimate will be allocated to third parties pursuant to existing and anticipated future cost sharing arrangements.
Impairment of Long-Lived Assets. We review the long-lived assets held and used by us (primarily property, plant and equipment and timber and timberlands) for impairment when events or changes in circumstances indicate that the carrying amount of assets may not be recoverable. We consider the necessity of undertaking such a review at least quarterly, and also when certain events or changes in circumstances occur. Events and changes in circumstances that may necessitate such a review include, but are not limited to: a significant decrease in the market price of a long-lived asset or group of long-lived assets; a significant adverse change in the extent or manner in which a long-lived asset or group of long-lived assets is being used or in its physical condition; a significant adverse change in legal factors or in the business climate that could affect the value of a long-lived asset or group of long-lived assets, including an adverse action or assessment by a regulator; an accumulation of costs significantly in excess of the amount originally expected for the acquisition or construction of a long-lived asset or group of long-lived assets; current-period operating or cash flow loss combined with a history of operating or cash flow losses or a projection or forecast that demonstrates continuing losses associated with the use of a long-lived asset or group of long-lived assets; and current expectation that, more likely than not, a long-lived asset or group of long-lived assets will be sold or otherwise disposed of significantly before the end of its previously estimated useful life. Identifying these events and changes in circumstances, and assessing their impact on the appropriate valuation of the affected assets under accounting principles generally accepted in the U.S., requires us to make judgments, assumptions and estimates.
In general, for assets held and used in our operations, impairments are recognized when the carrying amount of the long-lived asset or groups of long-lived assets is not recoverable and exceeds the fair value of the asset or group of assets. The carrying amount of a long-lived asset or groups of long-lived assets is not recoverable if it exceeds the sum of the undiscounted cash flows expected to result from the use and eventual disposition of the assets or group of assets. The key assumptions in estimating these cash flows relate to future production volumes, pricing of commodity or specialty products and future estimates of expenses to be incurred as reflected in our long-range internal planning models. Our assumptions regarding pricing are based upon the average pricing over the commodity cycle (generally five years) due to the inherent volatility of commodity product pricing, and reflect our assessment of information gathered from industry research firms, research reports published by investment analysts and other published forecasts. Our assumptions regarding expenses reflect our expectation that we will continue to reduce production costs to offset inflationary impacts.
When impairment is indicated for assets held and used in our operations, the book values of the affected assets are written down to their estimated fair value, which is generally based upon discounted future cash flows associated with the affected assets. When impairment is indicated for assets to be disposed of, the book values of the affected assets are written down to their estimated fair value, less estimated selling costs. Consequently, a determination to dispose of particular assets can require us to estimate the net sales proceeds expected to be realized upon such disposition, which may be less than the estimated undiscounted future net cash flows associated with such assets prior to such determination, and thus require an impairment charge. In situations where we have experience in selling assets of a similar nature, we may estimate net sales proceeds on the basis of that experience. In other situations, we hire independent appraisers to estimate net sales proceeds.
Due to the numerous variables associated with our judgments and assumptions relating to the valuation of assets in these circumstances, and the effects of changes in circumstances affecting these valuations, both the precision and reliability of the resulting estimates of the related impairment charges are subject to substantial uncertainties and, as additional information becomes known, we may change our estimates significantly.
Income Taxes. The determination of the provision for income taxes, and the resulting current and deferred tax assets and liabilities, involves significant management judgment, and is based upon information and estimates available to management at the time of such determination. The final income tax liability to any taxing jurisdiction with respect to any calendar year will ultimately be determined long after our financial statements have been published for that year. We maintain reserves for known estimated tax exposures in federal, state and international jurisdictions; however, actual results may differ materially from our estimates.
Judgment is also applied in determining whether deferred tax assets will be realized in full or in part. When we consider it to be more likely than not that all or some portion of a deferred tax asset will not be realized, a valuation allowance is established for the amount of the deferred tax asset that is estimated not to be realizable. As of December 31, 2013, we had established valuation allowances against certain deferred tax assets, primarily related to state and foreign carryovers of net operating losses, credits and capital losses. We have not established valuation allowances against other deferred tax assets based upon positive evidence such as recent earnings history, generally improving economic conditions and deferred tax liabilities which we anticipate to reverse within the carry forward period. Accordingly, changes in facts or circumstances affecting the likelihood of realizing a deferred tax asset could result in the need to record additional valuation allowances.
Pension Plans. Most of our U.S. employees and many of our Canadian employees participate in defined benefit pension plans sponsored by LP. We account for the consequences of our sponsorship of these plans in accordance with accounting principles generally accepted in the U.S., which require us to make actuarial assumptions that are used to calculate the related assets, liabilities and expenses recorded in our financial statements. While we believe we have a reasonable basis for these assumptions, which include assumptions regarding long-term rates of return on plan assets, life expectancies, rates of increase in salary levels, rates at which future values should be discounted to determine present values and other matters, the amounts of our pension related assets, liabilities and expenses recorded in our financial statements would differ if we used other assumptions. See further discussion related to pension plans below under the heading “Defined Benefit Pension Plans” and in Note 13 of the Notes to the consolidated financial statements included in item 8 of this report.
Workers’ Compensation. We are self insured for most of our U.S. employees’ workers compensation claims. We account for these plans in accordance with accounting principles generally accepted in the U.S., which require us to make actuarial assumptions that are used to calculate the related assets, liabilities and expenses recorded in our financial statements. While we believe we have a reasonable basis for these assumptions, which include assumptions regarding rates at which future values should be discounted to determine present values, expected future health care costs and other matters, the amounts of our liabilities and related expenses recorded in our financial statements would differ if we used other assumptions.
Warranty Obligations. Customers are provided with a limited warranty against certain defects associated with our products for periods of up to fifty years. We estimate the costs to be incurred under these warranties and record a liability in the amount of such costs at the time product revenue is recognized. Factors that affect our warranty liability include the historical and anticipated rates of warranty claims and the cost of resolving such. We periodically assess the adequacy of our recorded warranty liability for each product and adjust the amounts as necessary. While we believe we have a reasonable basis for these assumptions, actual warranty costs in the future could differ from our estimates.
NON-GAAP FINANCIAL MEASURES
In evaluating our business, we utilize several non-GAAP financial measures. A non-GAAP financial measure is generally defined by the SEC as one that purports to measure historical or future financial performance, financial position or cash flows, but excludes or includes amounts that would not be so excluded or included under applicable GAAP guidance. In this report on Form 10-K, we disclose earnings (loss) from continuing operations before interest expense, taxes, depreciation and amortization (“EBITDA from continuing operations”) which is a non-GAAP financial measure. Additionally, we disclose Adjusted EBITDA from continuing operations which further adjusts EBITDA from continuing operations to exclude stock based compensation expense, (gain) loss on acquisitions, (gain) loss on sales or impairment of joint ventures interest and long lived assets, other operating charges and credits, (gain) loss on early debt extinguishment, acquisition expenses, (gain) loss on litigation settlements, other than temporary asset impairments, investment income and depreciation included in equity in (income) loss of unconsolidated affiliates. Neither EBITDA from continuing operations nor Adjusted EBITDA from continuing operations is a substitute for the GAAP measure of net income or operating cash flows or for any other GAAP measures of operating performance or liquidity.
We have included EBITDA from continuing operations and Adjusted EBITDA from continuing operations in this report on Form 10-K because we use them as important supplemental measures of our performance and believe that they are frequently used by securities analysts, investors and other interested persons in the evaluation of companies in our industry, some of which present EBITDA when reporting their results. We use EBITDA from continuing operations and Adjusted EBITDA from continuing operations to evaluate our performance as compared to other companies in our industry that have different financing and capital structures and/or tax rates. It should be noted that companies calculate EBITDA and Adjusted EBITDA differently and, therefore, our EBITDA and Adjusted EBITDA measures may not be comparable to EBITDA and Adjusted EBITDA reported by other companies. Our EBITDA and Adjusted EBITDA measures have material limitations as performance measures because they exclude interest expense, income tax (benefit) expense and depreciation and amortization which are necessary to operate our business or which we otherwise incur or experience in connection with the operation of our business.
The following table presents significant items by operating segment and reconciles results from continuing operations to EBITDA from continuing operations and Adjusted EBITDA from continuing operations:
RESULTS OF OPERATIONS
We reported net income of $177.1 million ($1.23 per diluted share) in 2013, which was comprised of income from continuing operations of $177.4 million ($1.23 per diluted share) and a loss from discontinued operations of $0.3 million ($0.00 per diluted share). This compares to net income of $28.8 million ($0.20 per diluted share) in 2012, which was comprised of income from continuing operations of $29.5 million ($0.20 per diluted share) and a loss from discontinued operations of $0.7 million ($0.00 per diluted share). We reported a net loss attributable to LP of $181.3 million ($1.36 per diluted share) in 2011, which was comprised of loss from continuing operations attributed to LP of $175.7 million ($1.32 per diluted share) and a loss from discontinued operations of $5.6 million ($0.04 per diluted share).
Net sales in 2013 were $2.1 billion, an increase of 23% from 2012 net sales of $1.7 billion. Net sales in 2012 as compared to 2011 were higher by 27%. Sales in 2013 were positively impacted by increases in OSB selling prices relative to 2012 and 2011.
Our results of operations for each of our segments are discussed below, as are results of operations for the “other” category which comprises other products that are not individually significant. See Note 26 of the Notes to the consolidated financial statements included in item 8 of this report for further information regarding our segments.
Our OSB segment manufactures and distributes OSB structural panel products in North America and certain export markets. OSB is an innovative, affordable and environmentally smart product made from wood strands arranged in layers and bonded with resin. We believe we are the largest and one of the most efficient producers of OSB in North and South America.
According to FEA, it is estimated for 2013 that OSB accounted for approximately 61% of the structural panel consumption in North America with plywood accounting for the remainder. We estimate that the overall North American structural panel market (based upon 2013 housing starts) was 28.3 billion square feet with the OSB market comprising an estimated 17.3 billion square feet of this market. Based upon our production in 2013 of 4.1 billion square feet, we estimate that we account for 24% of the North American OSB market and 14% of the overall North American structural panel market.
To enhance our industry leading position in the OSB business, we plan to: (1) leverage our expertise in OSB to capitalize on new opportunities for revenue growth through new product lines; (2) improve net realizations relative to weighted-average OSB regional pricing; (3) reduce costs and improve throughput and recovery by continuing to focus on efficiency, raw materials cost reductions and logistics; and (4) manage our capacity to meet our customers' expected needs for OSB demand.
OSB is manufactured through the use of wood strands arranged in layers and bonded with resins and wax. Significant cost inputs to produce OSB and approximate breakdown percentages for the year ended December 31, 2013 include wood (33%), resin and wax (24%), labor and burden (15%), utilities (6%) and manufacturing and other (22%).
Segment sales, operating profits (losses) and Adjusted EBITDA from continuing operations for this segment were as follows:
Percent changes in average sales prices and unit shipments for the year ended 2013 compared to 2012 and 2012 compared to 2011 were as follows:
2013 compared to 2012
OSB prices increased compared to 2012. The increase in OSB prices was likely due to strengthening of the relationship between regional supply and demand based upon currently operating facilities across the industry. The increase in selling prices favorably impacted operating results and Adjusted EBITDA from continuing operations by approximately $170 million for 2013 as compared to 2012. Sales volumes increased due to the improved housing market as well as continued movement into industrial applications and increased exports. As of December 31, 2013, one of our OSB mills was indefinitely curtailed. Two mills were restarted during 2013.
2012 compared to 2011
OSB prices increased compared to 2011. The increase in OSB prices was likely due to strengthening of the relationship between regional supply and demand based upon currently operating facilities across the industry. The increase in selling price favorably impacted operating results and Adjusted EBITDA from continuing operations by approximately $201 million for 2012 as compared to 2011. Sales volumes increased due to the improved housing market as well as continued movement into industrial applications and increased exports. As of December 31, 2012, three of our OSB mills were indefinitely curtailed.
Our siding segment produces and markets wood-based siding and related accessories and commodity OSB products. We believe that we are a leading wood composite exterior siding producer in North America. We manufacture exterior siding and other cladding products for the residential and commercial building markets, retain and non-residential structures. Additionally, we are seeking to optimize our current capacity by extending the hardboard lifecycle through innovative new products and features.
Our strategy is to drive product innovation by utilizing our technological expertise in wood and wood composites to better address the needs of our customers. We intend to increase our product offerings and production capacity of higher margin, value-added products through the addition of lower cost plants or the conversion of OSB plants from commodity structural panel production to OSB-based exterior siding products.
Segment sales, operating profits and Adjusted EBITDA from continuing operations for this segment were as follows:
Sales in this segment by product line were as follows:
Percent changes in average sales prices and unit shipments for the year ended 2013 compared to 2012 and 2012 compared to 2011 are as follows:
2013 compared to 2012
Siding sales volumes increased in our SmartSide® siding line due to continued penetration in several key focus markets including retail, repair and remodel markets, sheds and increased housing demand. Sales prices in our SmartSide siding product as compared to the prior year increased due primarily to changes in product mix as well as price increases implemented to offset increases in raw material costs.
Sales volumes declined slightly in our Canexel siding lines due to lower demand in Canada and international sales, primarily Europe. Sales prices were down slightly between years due to the impact of the fluctuations in the Canadian dollar related to the U.S dollar. Sales prices in the Canadian dollar increased by 3% between years.
Sales prices increased for our commodity OSB products as described in the discussion of our OSB segment above. The increase in selling price favorably impacted operating results and Adjusted EBITDA from continuing operations by approximately $8 million for 2013 as compared to 2012.
Overall, the increases in operating results for our siding segment for 2013 as compared to 2012 were due to increased OSB pricing and higher sales volumes in our SmartSide® siding line.
2012 compared to 2011
Siding sales volumes increased in our SmartSide® siding line due to continued penetration in several key focus markets, including retail, repair and remodel markets and sheds. Sales prices in our SmartSide® siding product as compared to the prior year increased due primarily to changes in product mix as well as a price increase implemented at the beginning of the second quarter of 2012. The price increase was implemented to offset increases in raw material costs.
Sales volumes declined slightly in our CanExel siding lines due to our distributors balancing supply and demand and lower shipments to Europe. Sales prices were flat between years.
Sales prices increased for our commodity OSB products as described in the discussion of our OSB segment above. The increase in selling price favorably impacted operating results and Adjusted EBITDA from continuing operations by approximately $11 million for 2012 as compared to 2011.
Overall, the increases in operating results for our siding segment for 2012 as compared to 2011 was primarily due to increased OSB pricing and higher sales volumes in our SmartSide® siding line.