Silicon Laboratories 10-K 2006
Documents found in this filing:
Washington, D.C. 20549
x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2005
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to
Commission file number: 000-29823
SILICON LABORATORIES INC.
(Exact name of registrant as specified in its charter)
(Registrants telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act: None.
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, $0.0001 Par Value
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. x Yes o No
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. o Yes x No
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. x Yes o No
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrants knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of accelerated filer and large accelerated filer in Rule 12b-2 of the Exchange Act. (Check one):
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). o Yes x No
The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold as of the last business day of the registrants most recently completed second fiscal quarter (July 1, 2005) was $1,222,304,855 (assuming, for this purpose, that only directors and officers are deemed affiliates).
There were 55,117,300 shares of the registrants common stock issued and outstanding as of February 1, 2006.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Proxy Statement for the registrants 2006 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.
EXCEPT FOR THE HISTORICAL FINANCIAL INFORMATION CONTAINED HEREIN, THE MATTERS DISCUSSED IN THIS REPORT ON FORM 10-K (AS WELL AS DOCUMENTS INCORPORATED HEREIN BY REFERENCE) MAY BE CONSIDERED FORWARD-LOOKING STATEMENTS WITHIN THE MEANING OF SECTION 27A OF THE SECURITIES ACT OF 1933, AS AMENDED, AND SECTION 21E OF THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED. SUCH FORWARD-LOOKING STATEMENTS INCLUDE DECLARATIONS REGARDING THE INTENT, BELIEF OR CURRENT EXPECTATIONS OF SILICON LABORATORIES INC. AND ITS MANAGEMENT AND MAY BE SIGNIFIED BY THE WORDS EXPECTS, ANTICIPATES, INTENDS, BELIEVES OR SIMILAR LANGUAGE. YOU ARE CAUTIONED THAT ANY SUCH FORWARD-LOOKING STATEMENTS ARE NOT GUARANTEES OF FUTURE PERFORMANCE AND INVOLVE A NUMBER OF RISKS AND UNCERTAINTIES. ACTUAL RESULTS COULD DIFFER MATERIALLY FROM THOSE INDICATED BY SUCH FORWARD-LOOKING STATEMENTS. FACTORS THAT COULD CAUSE OR CONTRIBUTE TO SUCH DIFFERENCES INCLUDE THOSE DISCUSSED UNDER RISK FACTORS AND ELSEWHERE IN THIS REPORT. SILICON LABORATORIES DISCLAIMS ANY INTENTION OR OBLIGATION TO UPDATE OR REVISE ANY FORWARD-LOOKING STATEMENTS, WHETHER AS A RESULT OF NEW INFORMATION, FUTURE EVENTS OR OTHERWISE.
Silicon Laboratories Inc. designs and develops proprietary, analog-intensive, mixed-signal integrated circuits (ICs) for a broad range of applications. Mixed-signal ICs are electronic components that convert real-world analog signals, such as sound and radio waves, into digital signals that electronic products can process. Therefore, mixed-signal ICs are critical components in numerous applications, including mobile handsets, cable and satellite set-top boxes, personal computer modems, Voice over Internet Protocol (VoIP) on data networks, voice over digital subscriber line (DSL) modems, satellite tuners and FM radio tuners, personal video recorders, telephone equipment and optical networking equipment. We also design and develop mixed-signal 8-bit microcontrollers (MCUs) which are incorporated in a broad range of applications in a variety of markets, including automotive, communications, consumer, industrial, medical and power management.
Our world-class, mixed-signal design engineers typically use standard complementary metal oxide semiconductor (CMOS) technology to create our innovative ICs that can improve the performance and dramatically reduce the cost, size and system power requirements of devices that our customers sell to their end-user customers. Our expertise in analog-intensive, mixed-signal IC design in CMOS allows us to develop new and innovative products that are highly integrated, which simplifies our customers designs and improves their time-to-market.
According to market research firm Gartner, personal computers (PCs) and mobile handsets are expected to remain the most significant market drivers for semiconductor consumption through 2008. In wired communications, increased enterprise equipment spending and capital expenditures by service providers combined with broadband and Voice over Packet technology continue to represent growth areas in the communications IC market which Gartner expects to top $80 billion by 2008.
Recent growth in the market for ICs has been due to a number of factors, including the growth of Internet usage, development of new communications technologies, availability of improved communications services at lower costs, broad deployment of optical networks and remote access requirements for corporate networks. This demand has fueled tremendous growth in the number of electronic devices. For example, in mobile handset markets, the demand for wireless phones and other wireless devices, such as personal digital assistants, has grown steadily as wireless services have become increasingly popular and affordable. In other markets, demand has increased for a wide range of electronic products, including PCs, cable and satellite set-top boxes, fax machines, digital cameras, satellite radios and personal video recorders (PVRs). Consumers increasingly demand higher capacity connections at their residences using cable modems or high speed DSL. Voice over Internet Protocol technology, which enables voice traffic over data networks, is emerging as a viable alternative to traditional telephone networks. The demand for greater and faster Internet access by households and businesses has increased the need to significantly upgrade the communications backbone to handle this traffic, increasing the need for smaller, faster and better performing networking systems that route this traffic.
This intersection between the analog world we live in and the digital world requires numerous analog-intensive, mixed-signal circuits. Traditional designs for electronic devices have used mixed-signal solutions built with numerous, complex discrete analog and digital components. While these traditional designs provide the required functionality, they can be inefficient and inadequate for use in markets where size, cost, power consumption and performance are increasingly important product differentiators. In order to improve their competitive position, electronic device manufacturers need advanced mixed-signal ICs that reduce the number of discrete components and required board space to create smaller products with improved price/performance characteristics. Additionally, these manufacturers require programmable ICs that can be reconfigured to comply with numerous and constantly evolving international electronic standards without altering the fundamental design of a product.
Manufacturers of electronic devices face accelerating time-to-market demands and must adapt to evolving industry standards and new technologies. Because analog-intensive, mixed-signal IC design expertise is difficult to find, these manufacturers increasingly are turning to third parties, like us, to provide advanced mixed-signal solutions. Mixed-signal design involves great complexity and difficulty, because the performance of the IC depends on the creative analog expertise of engineers to optimize speed, power, amplitude and resolution despite the noisy digital environment and within the constraints of standard manufacturing processes. The development of analog design expertise typically requires years of practical analog design experience under the guidance of a senior engineer, and engineers with the required level of skill and expertise are in short supply.
Many third-party IC providers lack sufficient analog expertise to develop compelling mixed-signal ICs. As a result, manufacturers of electronic devices value third-party providers that can supply them with mixed-signal ICs with greater functionality, smaller size and lower power requirements at a reduced cost and shorter time-to-market.
We provide analog-intensive, mixed-signal ICs for use in a variety of electronic products in a broad range of applications including mobile handsets, PC modems, satellite set top boxes, automotive controls and sensors, radio tuners, personal video recorders, industrial monitoring and control, central office telephone equipment and optical networking equipment. Our products integrate complex mixed-signal functions that are frequently performed by numerous discrete components in competitive products into single chips or chipsets. By doing so, we are able to create products that when compared to many competitive products:
· Require less board space;
· Reduce the use of external components;
· Can offer superior performance;
· Provide increased reliability;
· Reduce system power requirements;
· Are easier for customers to use; and
· Reduce costs.
We group our products into two categories: mobile handset products and broad-based mixed-signal products. Mobile handset products include the Aero® Transceivers, the AeroFONE single-chip phone, Power Amplifiers (PA) and to the extent incorporated into handsets, the FM radio tuners. Broad-based mixed-signal products include our silicon Direct Access Arrangement (DAA), ISOmodem® embedded modems, ProSLIC® telephony interface circuits, microcontroller products, DSL analog front end, SiPHY® optical physical layer transceivers, precision clock & data recovery ICs (CDRs), XM satellite radio tuner, digital power products, FM broadcast radio tuners for non-handset applications, oscillators (XOs), voltage-controlled oscillators (VCXOs), general purpose RF Synthesizers and SiRXTM satellite receivers. The following table summarizes the diverse product areas and applications for the various ICs that we have introduced to customers:
During fiscal 2005, sales of our mobile handset products and broad-based mixed-signal products accounted for 44% and 56% of our revenues, respectively. During fiscal 2004 and 2003, sales of our mobile handset products and broad-based mixed-signal products each accounted for approximately 50% of our revenues.
We market our products in various markets through our direct sales force, a network of independent sales representatives, and electronics distributors. Direct and distributor customers buy on an individual purchase order basis, rather than pursuant to long-term agreements.
We consider our customer to be the end customer purchasing either directly from a distributor, a contract manufacturer or us. An end customer purchasing through a contract manufacturer typically instructs such contract manufacturer to obtain our products and incorporate such products with other components for sale by such contract manufacturer to the end customer. Although we actually sell the products to, and are paid by, the distributors and contract manufacturers, we refer to such end customer as our customer.
Two of our distributors, Edom Technology and Uniquest, each selling products to customers in Asia, represented 29% and 11% of our fiscal 2005 revenues, respectively. Distributors are not considered end customers, but rather serve as a sales channel to our end customers. No other distributor accounted for 10% or more of revenues for fiscal 2005.
During fiscal 2005, our ten largest end customers accounted for 51% of our revenues. We had one end customer, Samsung, which represented 14% of our revenues. No other single end customer accounted for more than 10% of our revenues. Our major customers include Advanced Digital Broadcast, Agere Systems, Apple, Conexant, Intel, LG Electronics, Motorola, Sagem, Samsung and Thomson.
We maintain five sales offices in North America. We provide European sales support through our subsidiaries in the United Kingdom, France, Germany, Italy and Sweden. Our Asia Pacific sales are supported through our subsidiaries in Japan, Hong Kong and Singapore, as well as sales offices in South Korea, Taiwan and China. Revenue is attributed to a geographic area based on the end customers shipped-to location. The percentage of our revenues to customers located outside of the United States was 91% in fiscal 2005, 89% in fiscal 2004 and 80% in fiscal 2003. In fiscal 2005, South Korea, Taiwan and China accounted for 17%, 17% and 13% of revenues, respectively. In fiscal 2004, South Korea, Taiwan and China accounted for 28%, 16% and 10% of revenues, respectively.
Our direct sales force includes regional sales managers in the field and area business managers to further support customer communications. Many of these managers have engineering degrees. We maintain a dedicated website for our field sales organization, which includes technical documentation, backlog information, order status, product availability and new product introduction information to support our communications with that organization. Additionally, we provide direct communication to all field sales personnel as part of a structured sales communications program.
We also utilize independent sales representatives and distributors to generate sales of our products. We have relationships with many independent sales representatives and distributors worldwide whom we have selected based on their understanding of the mixed-signal IC marketplace and their ability to provide effective field sales applications support for our products.
Our marketing efforts are targeted at both identified industry leaders and emerging market participants. Direct marketing activities are supplemented by a focused marketing communications effort that seeks to raise awareness of our company and products. Our public relations efforts are focused on leading trade and business publications. Our external website is used to deliver corporate information and product information. We also pursue targeted advertising in key trade publications and we have a cooperative marketing program that allows our distributors and representatives to promote our products to their local markets in conjunction with their own advertising activities. Finally we maintain a presence at strategic trade shows and industry events. These activities, in combination with direct sales activities, help drive demand for our products.
Due to the complex and innovative nature of our ICs, we employ experienced applications engineers who work closely with customers to support the design-win process, and can significantly accelerate the customers time required to bring a product to market. A design-win occurs when a customer has designed our ICs into its product architecture. A considerable amount of effort to assist the customer in incorporating our ICs into its products is typically required prior to any sale. In many cases, our innovative ICs require significantly different implementations than existing approaches and, therefore, successful implementations may require extensive communication with potential customers. The amount of time required to achieve a design-win can vary substantially depending on a customers development cycle, which can be relatively short (such as three months) or very long (such as two years) based on a wide variety of customer factors. Not all design wins ultimately result in revenue. However, once a completed design architecture has been implemented and produced in high volumes, our customers are reluctant to significantly alter their designs due to this extensive design-win process. We believe this process, coupled with our intellectual property protection, promotes relatively longer product life cycles for our ICs and high barriers to entry for competitive products, even if such competing products are offered at lower prices. Finally, our close collaboration with our customers provides us with knowledge of derivative product ideas or completely new product line offerings that may not otherwise arise in other new product discussions.
Through our research and development efforts, we apply our experienced analog and mixed-signal engineering talent and expertise to create new ICs that integrate functions typically performed inefficiently by multiple discrete components. This integration generally results in lower costs, smaller die sizes, lower power demands and enhanced price/performance characteristics. We attempt to reuse successful techniques for integration in new applications where similar benefits can be realized. We believe that reliable and precise analog and mixed-signal ICs can only be developed by teams of engineers that coordinate their efforts under the direction of senior engineers who have significant analog experience and are familiar with the intricacies of designing these ICs for commercial volume production. The development of test methodologies is a critical activity in releasing a new product for commercial success. We believe that we have attracted some of the best engineers in our industry.
Research and development expenses were $101.2 million, $78.1 million and $51.9 million in fiscal 2005, 2004, and 2003, respectively.
Our product development process facilitates the design of highly-innovative, analog-intensive, mixed-signal ICs. Our senior engineers start the product development process by forming an understanding of our customers products and needs and then design alternatives with increased functionality and with decreasing power, size and cost requirements. Our engineers deep knowledge of existing and emerging standards and performance requirements help us to assess the technical feasibility of a particular IC. We target areas where we can provide compelling product improvements. Once we have solved the primary challenges, our field application engineers continue to work closely with our customers design teams to maintain and develop an understanding of our customers needs, allowing us to formulate derivative products and refined features.
In providing mixed-signal ICs for our customers, we believe our key competitive advantages are:
· analog design expertise in CMOS;
· digital signal processing design expertise;
· microcontroller and system on a chip design expertise; and
· our broad understanding of systems technology and trends.
To fully capitalize on these advantages, we have assembled a world-class development team with exceptional analog and mixed-signal design expertise led by accomplished senior engineers.
We believe that our most significant core competency is our world-class analog design capability. Additionally, we strive to design substantially all of our ICs in CMOS processes. There are several modern process technologies for manufacturing semiconductors including CMOS, Bipolar, BiCMOS, silicon germanium and gallium arsenide. While it is significantly more difficult to design analog ICs in CMOS, CMOS provides multiple benefits versus existing alternatives, including significantly reduced cost, reduced technology risk and greater worldwide foundry capacity. CMOS is the most commonly used process technology for manufacturing digital ICs and as a result is most likely to be used for the manufacturing of ICs with finer line geometries, which enable smaller and faster ICs. By designing our ICs in CMOS, we enable our products to benefit from this trend towards finer line geometries, which allows us to integrate more digital functionality into our mixed-signal ICs.
Designing analog and mixed-signal ICs is significantly more complicated than designing stand alone digital ICs. While advanced software tools exist to help automate digital IC design, there are far fewer tools for advanced analog and mixed-signal IC design. In many cases, our analog circuit design efforts begin at the fundamental transistor level. We believe that we have a demonstrated ability to design the most difficult analog and RF circuits using standard CMOS technologies. For example, our ProSLIC product family integrates subscriber line interface circuit (SLIC), codec and battery generation functionality into a single low-voltage CMOS IC. Similarly, bulky wireless phone components such as voltage controlled oscillators and intermediate frequency surface acoustic wave filters are replaced by our AERO transceiver products.
We consider the partitioning of a circuits functionality to be a proprietary and creative design technique. Our digital signal processing design expertise maximizes the price/performance characteristics of both the analog and digital functions and allows our ICs to work in an optimized manner to accomplish particular tasks. Generally, we surround core analog circuitry with digital CMOS transistors, which allows our ICs to perform the required analog functions with increased digital capabilities. For example, our ProSLIC product is designed to function more efficiently than traditional products for the source end of the telephone line, which involve a two chip combination requiring more board space and numerous external components. The ProSLIC product is partitioned by combining a core analog design that provides analog-to-digital conversion and digital-to-analog conversion with optimized digital signal processing functions such as data compression, data expansion, filtering and tone generation. In this manner, we can isolate the higher voltage required to ring a telephone in low-cost, off-chip high voltage transistors or a small, complementary high voltage chip, thereby enabling us to fulfill the remaining core functions with a single CMOS chip. As a further example, our SiPHY Optical Physical Layer Transceivers utilize an architecturally advanced phase locked loop circuit based principally on digital signal processing. By performing a significant portion of this function in the digital domain in a monolithic chip, the circuit has been able to satisfy the demanding specifications of the optical network SONET standard using inexpensive CMOS transistors.
We have expanded our system on a chip expertise to include the talent and circuit integration methodologies required to combine precision analog, high-speed digital, Flash memory and in-system programmability into a single, monolithic CMOS integrated circuit. Our microcontroller products are designed to capture an external analog signal, convert it to a digital signal, compute digital functions on the stream of data and then communicate the results through a standard digital interface. The ability to develop standard products with the broadest possible customer application base while being cost efficient with the silicon area of the monolithic CMOS integrated circuit requires a keen sense of customer value and engineering capabilities. Additionally, to manage the wide variety of signals on a monolithic piece of silicon including electrical noise, harmonics and other electronic distortions requires a fundamental knowledge of devices physics and accumulated design expertise.
We also recently demonstrated our system on a chip capabilities with the introduction of the AeroFONE single-chip phone, a fully functional and completely integrated single-chip phone. This solution provides superior integration and software flexibility and demonstrates our capability to design our own software that works with our customer and software partner solutions.
Our focused expertise in mixed-signal ICs is the result of the breadth of engineering talent we have assembled with experience working in analog-intensive CMOS design for a wide variety of applications. This expertise, which we consider a competitive advantage, is the foundation of our in-depth understanding of the technology and trends that impact electronic systems and markets. Our expertise includes:
· isolation, which is critical for existing and emerging telecom networks;
· frequency synthesis, which is core technology for wireless and clocking applications;
· enabling integration of third-party software with our ICs to create combined solutions; and
· signal processing and precision analog, which forms the heart of consumer, industrial, medical and automotive electronics applications.
Our understanding of the role of analog/digital interfaces within electronic systems, standards evolution, and end market drivers enables us to identify product development opportunities and capitalize on market trends.
As a fabless IC manufacturer, we conduct IC design and development in our facilities and electronically transfer our proprietary IC designs to third-party semiconductor fabricators who process silicon wafers to produce the ICs that we design. Our IC designs typically use industry-standard CMOS manufacturing process technology to achieve a level of performance normally associated with more expensive special-purpose IC fabrication technology. We believe the use of CMOS technology facilitates the rapid production of our ICs within a lower cost framework. Our IC production employs submicron process geometries which are readily available from leading foundry suppliers worldwide, thus increasing the likelihood that manufacturing capacity will be available throughout our products life cycles. We currently partner principally with Taiwan Semiconductor Manufacturing Co. (TSMC) to manufacture our semiconductor wafers. We believe that our fabless manufacturing model significantly reduces our capital requirements and allows us to focus our resources on design, development and marketing of our ICs.
Once the silicon wafers have been produced, they are shipped directly to our third-party assembly subcontractors. The assembled ICs are then forwarded for final testing, either to our third-party test subcontractors or our facilities in Austin, Texas, prior to shipping to our customers. We have increasingly utilized offshore third-party test subcontractors, typically in Asia where the parts are assembled and where the products are frequently delivered to our customers. During the fourth quarter of 2005, more than 80% of our units shipped were tested by offshore third-party test subcontractors. We expect that our utilization of offshore third-party test subcontractors will remain at this level during fiscal 2006.
As of December 31, 2005, our backlog was approximately $98.0 million, compared to approximately $69.9 million as of January 1, 2005. We include in backlog accepted product purchase orders from customers and worldwide distributor stocking orders. We only include orders with an expected shipping date from us within six months. Product orders in our backlog are subject to changes in delivery schedules or cancellation at the option of the purchaser typically without penalty. Our backlog may fluctuate significantly depending upon customer order patterns which may, in turn, vary considerably based on rapidly changing business circumstances. Backlog from distributors is not recognized as revenue until the products are sold by the distributors. Additionally, our arrangements with distributors typically provide for price protection and stock rotation activities. Accordingly, we do not believe that our backlog at any time is necessarily representative of actual sales for any succeeding period.
The markets for semiconductors generally, and for analog and mixed-signal ICs in particular, are intensely competitive. We believe the principal competitive factors in our industry are:
We believe that we are competitive with respect to these factors, particularly because our ICs typically are smaller in size, are highly integrated, achieve high performance specifications at lower price points than competitive products and are manufactured in standard CMOS which generally enables us to supply them on a relatively rapid basis to customers to meet their product introduction schedules. However, disadvantages we face include our relatively short operating history in certain of our markets and the need for customers to redesign their products and modify their software to implement our ICs in their products.
We anticipate that the market for our products will continually evolve and will be subject to rapid technological change. For example, the mobile handset market is transitioning to more advanced air interfaces including Enhanced Data Rates for Global Evolution (EDGE) and Wideband Code Division Multiple Access (WCDMA) in addition to the Global System for Mobile Communications (GSM)/General Packet Radio Services (GPRS) standard. We will also need to develop ICs that meet transitioning standards within each air interface category. Our GSM/GPRS mobile handset products have accounted for substantially all of our mobile handset revenue to date. If we are not able to develop EDGE and/or WCDMA compliant products that gain similar acceptance, our mobile handset revenue and overall operating results would be adversely affected. In addition, as we target and supply products to numerous markets and applications, we face competition from a relatively large number of competitors. Across our product offerings, we compete with Agere Systems, Atmel, Analog Devices, Broadcom, Conexant, Cypress, Freescale, Fujitsu, Infineon Technologies, Legerity, Maxim Integrated Products, MediaTek, Microchip, National Semiconductor, Philips, Renesas, RF Micro Devices, Semtech, Skyworks Solutions, Texas Instruments and others. We expect to face competition in the future from our current competitors, other manufacturers and designers of semiconductors, and innovative start-up semiconductor design companies. Our competitors may also offer bundled chipset kit arrangements offering a more complete product, which may negatively impact our competitive position despite the technical merits or advantages of our products. In addition, our customers could develop products or technologies internally that would replace their need for our products and would become a source of competition. As the markets for electronic products grow, we also may face competition from traditional electronic device companies. These companies may enter the mixed-signal semiconductor market by introducing their own products, including components within their products that would eliminate the need for our ICs, or by entering into strategic relationships with or acquiring other existing IC providers.
Many of our competitors and potential competitors have longer operating histories, greater name recognition, access to larger customer bases, complementary product offerings, and significantly greater financial, sales and marketing, manufacturing, distribution, technical and other resources than us. Current and potential competitors have established or may establish financial and strategic relationships between themselves or with our existing or potential customers, resellers or other third parties. Accordingly, it is possible that new competitors or alliances among competitors could emerge and rapidly acquire significant market share.
Our future success depends in part upon our proprietary technology. We seek to protect our technology through a combination of patents, copyrights, trade secrets, trademarks and confidentiality procedures. As of December 31, 2005, we had more than 600 issued or pending United States patents in the IC field. We also frequently file for patent protection in a variety of international jurisdictions with respect to the proprietary technology covered by our U.S. patents and patent applications. There can be no assurance that patents will ever be issued with respect to these applications. Furthermore, it is possible that any patents held by us may be invalidated, circumvented, challenged or licensed to others. In addition, there can be no assurance that such patents will provide us with competitive advantages or adequately safeguard our proprietary rights. While we continue to file new patent applications with respect to our recent developments, existing patents are granted for prescribed time periods and will expire at various times in the future.
We claim copyright protection for proprietary documentation for our products. We have filed for registration, or are in the process of filing for registration, of the visual images of certain ICs with the U.S. Copyright Office. We have registered the Silicon Laboratories logo and a variety of other product and product family names as trademarks in the United States and selected foreign jurisdictions. All other trademarks, service marks or trade names appearing in this report are the property of their respective owners. We also attempt to protect our trade secrets and other proprietary information through agreements with our customers, suppliers, employees and consultants, and through other customary security measures. We intend to protect our rights vigorously, but there can be no assurance that our efforts will be successful. In addition, the laws of other countries in which our products are sold may not protect our products and intellectual property rights to the same extent as the laws of the United States.
While our ability to effectively compete depends in large part on our ability to protect our intellectual property, we believe that our technical expertise and ability to introduce new products in a timely manner will be an important factor in maintaining our competitive position.
Many participants in the semiconductor and electronics industries have a significant number of patents and have frequently demonstrated a readiness to commence litigation based on allegations of patent and other intellectual property infringement. From time to time, third parties may assert infringement claims against us. We may not prevail in any such litigation or may not be able to license any valid and infringed patents from third parties on commercially reasonable terms, if at all. Litigation, regardless of the outcome, is likely to result in substantial cost and diversion of our resources, including our managements time. Any such litigation could materially adversely affect us. For further information regarding patent litigation, please see Part I, Item 3. Legal Proceedings.
Our licenses include industry standard licenses with our vendors, such as wafer fabrication tool libraries, third party core libraries, computer-aided design applications and business software applications.
As of December 31, 2005, we employed 651 people. Our success depends on the continued service of our key technical and senior management personnel and on our ability to continue to attract, retain and motivate highly skilled analog and mixed-signal engineers. The competition for such personnel is intense. We have never had a work stoppage and none of our employees are represented by a labor organization. We consider our employee relations to be good.
Federal, state and local regulations impose various environmental controls on the storage, use, discharge and disposal of certain chemicals and gases used in the semiconductor industry. Our compliance with these laws and regulations has not had a material impact on our financial position or results of operations.
WE MAY NOT BE ABLE TO MAINTAIN OUR HISTORICAL GROWTH AND MAY EXPERIENCE SIGNIFICANT PERIOD-TO-PERIOD FLUCTUATIONS IN OUR REVENUES AND OPERATING RESULTS, WHICH MAY RESULT IN VOLATILITY IN OUR STOCK PRICE
Although we have generally experienced revenue growth in our history, we may not be able to sustain this growth. We may also experience significant period-to-period fluctuations in our revenues and operating results in the future due to a number of factors, and any such variations may cause our stock price to fluctuate. It is likely that in some future period our revenues or operating results will be below the expectations of public market analysts or investors. If this occurs, our stock price may drop, perhaps significantly.
A number of factors, in addition to those cited in other risk factors applicable to our business, may contribute to fluctuations in our revenues and operating results, including:
· the timing and volume of orders received from our customers;
· the timeliness of our new product introductions and the rate at which our new products may cannibalize our older products;
· the rate of acceptance of our products by our customers, including the acceptance of new products we may develop for integration in the products manufactured by such customers, which we refer to as design wins;
· the time lag and realization rate between design wins and production orders;
· the demand for, and life cycles of, the products incorporating our ICs;
· the rate of adoption of mixed-signal ICs in the markets we target;
· deferrals or reductions of customer orders in anticipation of new products or product enhancements from us or our competitors or other providers of ICs;
· changes in product mix;
· the average selling prices for our products could drop suddenly due to competitive offerings or competitive predatory pricing, especially with respect to our mobile handset and modem products;
· the average selling prices for our products generally decline over time;
· changes in market standards;
· impairment charges related to inventory, equipment or other long-lived assets;
· the software used in our products and provided by third-party software providers must meet the needs of our customers;
· significant legal costs to defend our intellectual property rights or respond to claims against us; and
· the rate at which new markets emerge for products we are currently developing or for which our design expertise can be utilized to develop products for these new markets.
The markets for mobile handsets, personal computers, satellite television set-top boxes and VoIP applications are characterized by rapid fluctuations in demand and seasonality that result in corresponding fluctuations in the demand for our products that are incorporated in such devices. Additionally, the rate of technology acceptance by our customers results in fluctuating demand for our products as customers are reluctant to incorporate a new IC into their products until the new IC has achieved market acceptance. Once a new IC achieves market acceptance, demand for the new IC can quickly accelerate to a point and then level off such that rapid historical growth in sales of a product should not be viewed as indicative of continued future growth. In addition, demand can quickly decline for a product when a new IC product is introduced and receives market acceptance. For example, mobile handset transceivers that provide some of the functionality provided by our RF Synthesizers have been introduced to market by us and our competitors. The introduction of these competing transceivers, including our Aero Transceiver, resulted in a rapid decline in our sales of RF Synthesizers for mobile handsets. Due to the various factors mentioned above, the results of any prior quarterly or annual periods should not be relied upon as an indication of our future operating performance.
WE DEPEND ON A LIMITED NUMBER OF CUSTOMERS FOR A SUBSTANTIAL PORTION OF OUR REVENUES, AND THE LOSS OF, OR A SIGNIFICANT REDUCTION IN ORDERS FROM, ANY KEY CUSTOMER COULD SIGNIFICANTLY REDUCE OUR REVENUES
The loss of any of our key customers, or a significant reduction in sales to any one of them, would significantly reduce our revenues and adversely affect our business. During fiscal 2005, our ten largest customers accounted for 51% of our revenues. We had one customer, Samsung, which represented 14% of our revenues. Most of the markets for our products are dominated by a small number of potential customers. Therefore, our operating results in the foreseeable future will continue to depend on our ability to sell to these dominant customers, as well as the ability of these customers to sell products that incorporate our IC products. In the future, these customers may decide not to purchase our ICs at all, purchase fewer ICs than they did in the past or alter their purchasing patterns, particularly because:
· we do not have material long-term purchase contracts with our customers;
· substantially all of our sales to date have been made on a purchase order basis, which permits our customers to cancel, change or delay product purchase commitments with little or no notice to us and without penalty;
· some of our customers may have efforts underway to actively diversify their vendor base which could reduce purchases of our ICs; and
· some of our customers have developed or acquired products that compete directly with products these customers purchase from us, which could affect our customers purchasing decisions in the future.
While we have been a significant supplier of ICs used in many of our customers products, our customers regularly evaluate alternative sources of supply in order to diversify their supplier base, which increases their negotiating leverage with us and protects their ability to secure these components. We believe that any expansion of our customers supplier bases could have an adverse effect on the prices we are able to charge and volume of product that we are able to sell to our customers, which would negatively affect our revenues and operating results.
WE ARE SUBJECT TO RISKS RELATING TO PRODUCT CONCENTRATION AND LACK OF REVENUE DIVERSIFICATION
We derive a substantial portion of our revenues from a limited number of products, and we expect these products to continue to account for a large percentage of our revenues in the near term. Continued market acceptance of these products, is therefore, critical to our future success. In addition, substantially all of our products that we have sold include technology related to one or more of our issued U.S. patents. If these patents are found to be invalid or unenforceable, our competitors could introduce competitive products that could reduce both the volume and price per unit of our products. Our business, operating results, financial condition and cash flows could therefore be adversely affected by:
· a decline in demand for any of our more significant products, including our Aero Transceiver, modem products or ProSLIC;
· failure of our products to achieve continued market acceptance;
· an improved version of our products being offered by a competitor;
· technological standard or change that we are unable to address with our products;
· a failure to release new products or enhanced versions of our existing products on a timely basis; and
· the failure of new products, such as our recently introduced AeroFONE and FM tuner products, to achieve market acceptance.
We are particularly dependent on sales of our mobile handset products, which constituted 44% of our total revenues in fiscal 2005 and 50% of our total revenues in fiscal 2004. In particular, our Aero Transceiver mobile handset product and its subsequent derivatives represented 44% of our total revenues in fiscal 2005 and 48% of our total revenues in fiscal 2004. If the market for the Aero Transceiver or the market for GSM/GPRS or EDGE mobile handsets in which these products are incorporated deteriorates, our operating results would be materially and adversely affected.
Our future success will depend on our ability to reduce our dependence on a few products by developing or acquiring new ICs and product enhancements that achieve market acceptance in a timely and cost-effective manner. The development of mixed-signal ICs is highly complex, and we have at times experienced delays in completing the development and introduction of new products and product enhancements. Successful product development and market acceptance of our products depend on a number of factors, including:
· changing requirements of customers;
· accurate prediction of market and technical requirements, such as the shift of GSM/GPRS to EDGE and WCDMA;
· timely completion and introduction of new designs;
· timely qualification and certification of our ICs for use in our customers products;
· commercial acceptance and volume production of the products into which our ICs will be incorporated;
· availability of foundry, assembly and test capacity;
· achievement of high manufacturing yields;
· quality, price, performance, power use and size of our products; availability, quality, price and performance of competing products and technologies;
· our customer service, application support capabilities and responsiveness;
· successful development of our relationships with existing and potential customers;
· changes in technology, industry standards or end-user preferences; and
· cooperation of third-party software providers and our semiconductor vendors to support our chips within a system.
We cannot provide any assurance that products which we recently have developed or may develop in the future will achieve market acceptance. We have introduced to market or are in development of many ICs. If our ICs fail to achieve market acceptance, or if we fail to develop new products on a timely basis that achieve market acceptance, our growth prospects, operating results and competitive position could be adversely affected. For example, in October 2005, we introduced the AeroFONE single-chip phone. This product is in the early stages of customer adoption and we cannot be certain that it will achieve market acceptance.
OUR RESEARCH AND DEVELOPMENT EFFORTS ARE FOCUSED ON A LIMITED NUMBER OF NEW TECHNOLOGIES AND PRODUCTS, AND ANY DELAY IN THE DEVELOPMENT, OR ABANDONMENT, OF THESE TECHNOLOGIES OR PRODUCTS BY INDUSTRY PARTICIPANTS, OR THEIR FAILURE TO ACHIEVE MARKET ACCEPTANCE, COULD COMPROMISE OUR COMPETITIVE POSITION
Our ICs are used as components in electronic devices in various markets. As a result, we have devoted and expect to continue to devote a large amount of resources to develop products based on new and emerging technologies and standards that will be commercially introduced in the future. Research and development expense during fiscal 2005 was $101.2 million, or 23.8% of revenues. A number of large companies are actively involved in the development of these new technologies and standards. Should any of these companies delay or abandon their efforts to develop commercially available products based on new technologies and standards, our research and development efforts with respect to these technologies and standards likely would have no appreciable value. In addition, if we do not correctly anticipate new technologies and standards, or if the products that we develop based on these new technologies and standards fail to achieve market acceptance, our competitors may be better able to address market demand than we would. Furthermore, if markets for these new technologies and standards develop later than we anticipate, or do not develop at all, demand for our products that are currently in development would suffer, resulting in lower sales of these products than we currently anticipate. For example, we have introduced to market the Aero Transceiver product for use in wireless phones operating on the GSM/GPRS standard. We believe this market is now in the early stages of adopting the EDGE and WCDMA standards, which allow for enhanced data generation and transmission using mobile handsets. Forecasters expect the EDGE and WCDMA markets to further develop and expand in 2006 and 2007. In September 2005, we extended our Aero family to meet the EDGE standard with the Aero IIe single-chip EDGE Radio. However, we cannot be certain that the use of this technology will not change in the future and thereby make our products unsuitable. Furthermore, we cannot be certain that any product we develop for these standards will achieve market acceptance.
WE HAVE INCREASED OUR INTERNATIONAL ACTIVITIES SIGNIFICANTLY AND PLAN TO CONTINUE SUCH EFFORTS, WHICH SUBJECTS US TO ADDITIONAL BUSINESS RISKS INCLUDING INCREASED LOGISTICAL AND FINANCIAL COMPLEXITY, POLITICAL INSTABILITY AND CURRENCY FLUCTUATIONS
We have established additional international subsidiaries and have opened additional offices in international markets to expand our international activities in Europe and the Pacific Rim region. This has included the establishment of a headquarters in Singapore for non-U.S. operations. The percentage of our revenues to customers located outside of the United States was 91% in fiscal 2005, 89% in fiscal 2004 and 80% in fiscal 2003. We may not be able to maintain or increase international market demand for our products. Our international operations are subject to a number of risks, including:
· increased complexity and costs of managing international operations and related tax obligations, including our headquarters for non-U.S. operations in Singapore;
· protectionist laws and business practices that favor local competition in some countries;
· multiple, conflicting and changing tax laws and regulations that may impact both our international and domestic tax liabilities and result in increased complexity and costs;
· longer sales cycles;
· greater difficulty in accounts receivable collection and longer collection periods;
· high levels of distributor inventory subject to price protection and rights of return to us;
· political and economic instability;
· greater difficulty in hiring and retaining qualified technical sales and applications engineers and administrative personnel; and
· the need to have business and operations systems that can meet the needs of our international business and operating structure.
To date, all of our sales to international customers and purchases of components from international suppliers have been denominated in U.S. dollars. As a result, an increase in the value of the U.S. dollar relative to foreign currencies could make our products more expensive for our international customers to purchase, thus rendering our products less competitive.
The future growth of our business will depend in large part on our ability to manage our relationships with current and future distributors and sales representatives, develop additional channels for the distribution and sale of our products and manage these relationships. As we execute our indirect sales strategy, we must manage the potential conflicts that may arise with our direct sales efforts. For example, conflicts with a distributor may arise when a customer begins purchasing directly from us rather than through the distributor. The inability to successfully execute or manage a multi-channel sales strategy could impede our future growth. In addition, relationships with our distributors often involve the use of price protection and inventory return rights. This often requires a significant amount of sales managements time and system resources to manage properly.
In order to ensure availability of our products for some of our largest customers, we start the manufacturing of our products in advance of receiving purchase orders based on forecasts provided by these customers. However, these forecasts do not represent binding purchase commitments and we do not recognize sales for these products until they are shipped to the customer. As a result, we incur inventory and manufacturing costs in advance of anticipated sales. Because demand for our products may not materialize, manufacturing based on forecasts subjects us to increased risks of high inventory carrying costs, increased obsolescence and increased operating costs. These inventory risks are exacerbated when our customers purchase indirectly through contract manufacturers or hold component inventory levels greater than their consumption rate because this causes us to have less visibility regarding the accumulated levels of inventory for such customers. A resulting write-off of unusable or excess inventories would adversely affect our operating results.
Our products are complex and may contain errors, particularly when first introduced or as new versions are released. We rely primarily on our in-house testing personnel to design test operations and procedures to detect any errors prior to delivery of our products to our customers. Because our products are manufactured by third parties, should problems occur in the operation or performance of our ICs, we may experience delays in meeting key introduction dates or scheduled delivery dates to our customers. These errors also could cause us to incur significant re-engineering costs, divert the attention of our engineering personnel from our product development efforts and cause significant customer relations and business reputation problems. Any defects could require product replacement or recall or we could be obligated to accept product returns. Any of the foregoing could impose substantial costs and harm our business.
Product liability claims may be asserted with respect to our products. Our products are typically sold at prices that are significantly lower than the cost of the end-products into which they are incorporated. A defect or failure in our product could cause failure in our customers end-product, so we could face claims for damages that are disproportionately higher than the revenues and profits we receive from the products involved. Furthermore, product liability risks are particularly significant with respect to medical and automotive applications because of the risk of serious harm to users of these products. There can be no assurance that any insurance we maintain will sufficiently protect us from any such claims.
An increasing number of our new product developments are being designed in even more complex processes. For example, our Aero II was designed in a .13 micron CMOS process, which adds cost, complexity and elements of experimentation and development, particularly in the area of advanced mixed-signal design.
Prior to purchasing our products, our customers require that our products undergo an extensive qualification process, which involves testing of the products in the customers system as well as rigorous reliability testing. This qualification process may continue for six months or longer. However, qualification of a product by a customer does not ensure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision to the IC or software, changes in the ICs manufacturing process or the selection of a new supplier by us may require a new qualification process, which may result in delays and in us holding excess or obsolete inventory. After our products are qualified, it can take an additional six months or more before the customer commences volume production of components or devices that incorporate our products. We experienced this lengthy introduction to volume production cycle time with our CMOS Power Amplifier, which was introduced in the early part of fiscal 2004 and did not contribute to our revenues until the fourth quarter of fiscal 2005. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, toward qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, such failure or delay would preclude or delay sales of such product to the customer, which may impede our growth and cause our business to suffer.
WE RELY ON THIRD PARTIES TO MANUFACTURE, ASSEMBLE AND TEST OUR PRODUCTS AND THE FAILURE TO SUCCESSFULLY MANAGE OUR RELATIONSHIPS WITH OUR MANUFACTURERS AND SUBCONTRACTORS WOULD NEGATIVELY IMPACT OUR ABILITY TO SELL OUR PRODUCTS
We do not have our own wafer fab manufacturing facilities. Therefore, we rely principally on one third-party vendor, TSMC, to manufacture the ICs we design. We also currently rely principally on two Asian third-party assembly subcontractors, Advanced Semiconductor Engineering (ASE) and Amkor Technology, to assemble and package the silicon chips provided by the wafers for use in final products. Additionally, we rely on these offshore subcontractors for a substantial portion of the testing requirements of our products prior to shipping. We expect utilization of third-party subcontractors to continue in the future.
The cyclical nature of the semiconductor industry drives wide fluctuations in available capacity at third-party vendors. On occasion, we have been unable to adequately respond to unexpected increases in customer demand due to capacity constraints and, therefore, were unable to benefit from this incremental demand. We may be unable to obtain adequate foundry, assembly or test capacity from our third-party subcontractors to meet our customers delivery requirements even if we adequately forecast customer demand.
There are significant risks associated with relying on these third-party foundries and subcontractors, including:
· failure by us, our customers or their end customers to qualify a selected supplier;
· potential insolvency of the third-party subcontractors;
· reduced control over delivery schedules and quality;
· limited warranties on wafers or products supplied to us;
· potential increases in prices or payments in advance for capacity;
· increased need for international-based supply, logistics and financial management;
· their inability to supply or support new or changing packaging technologies; and
· low test yields.
We typically do not have long-term supply contracts with our third-party vendors which obligate the vendor to perform services and supply products to us for a specific period, in specific quantities, and at specific prices. Our third-party foundry, assembly and test subcontractors typically do not guarantee that adequate capacity will be available to us within the time required to meet demand for our products. In the event that these vendors fail to meet our demand for whatever reason, we expect that it would take up to twelve months to transition performance of these services to new providers. Such a transition may also require qualification of the new providers by our customers or their end customers.
Since our inception, most of the silicon wafers for the products that we have shipped were manufactured either by TSMC or its affiliates. Our customers typically complete their own qualification process. If we fail to properly balance customer demand across the existing semiconductor fabrication facilities that we utilize or are required by our foundry partners to increase, or otherwise change the number of fab lines that we utilize for our production, we might not be able to fulfill demand for our products and may need to divert our engineering resources away from new product development initiatives to support the fab line transition, which would adversely affect our operating results.
We incorporate technology (including software) licensed from third parties in our products. We could be subjected to claims of infringement regardless of our lack of involvement in the development of the licensed technology. Although a third party licensor is typically obligated to indemnify us if the licensed technology infringes on another partys intellectual property rights, such indemnification is typically limited in amount and may be worthless if the licensor becomes insolvent. See SIGNIFICANT LITIGATION OVER INTELLECTUAL PROPERTY IN OUR INDUSTRY MAY CAUSE US TO BECOME INVOLVED IN COSTLY AND LENGTHY LITIGATION WHICH COULD SERIOUSLY HARM OUR BUSINESS. Furthermore, any failure of third party technology to perform properly would adversely affect sales of our products incorporating such technology.
In recent periods, we have increased the scope of our operations and expanded our workforce from 588 employees at the end of fiscal 2004 to 651 employees at the end of fiscal 2005. This growth has placed, and any future growth of our operations will continue to place, a significant strain on our management personnel, systems and resources. We anticipate that we will need to implement a variety of new and upgraded sales, operational and financial enterprise-wide systems, information technology infrastructure, procedures and controls, including the improvement of our accounting and other internal management systems to manage this growth and maintain compliance with regulatory guidelines, including Sarbanes-Oxley Act requirements. As our business grows our internal management systems and processes will need to improve to ensure that we remain in compliance. We also expect that we will need to continue to expand, train, manage and motivate our workforce. All of these endeavors will require substantial management effort, and we anticipate that we will require additional management personnel and internal processes to manage these efforts and to plan for the succession from time to time of certain persons who have been key management and technical personnel. If we are unable to effectively manage our expanding global operations, including our international headquarters in Singapore, our business could be materially and adversely affected.
WE DEPEND ON OUR KEY PERSONNEL TO MANAGE OUR BUSINESS EFFECTIVELY IN A RAPIDLY CHANGING MARKET, AND IF WE ARE UNABLE TO RETAIN OUR CURRENT PERSONNEL AND HIRE ADDITIONAL PERSONNEL, OUR ABILITY TO DEVELOP AND SUCCESSFULLY MARKET OUR PRODUCTS COULD BE HARMED
We believe our future success will depend in large part upon our ability to attract and retain highly skilled managerial, engineering, sales and marketing personnel. We believe that our future success will be dependent on retaining the services of our key personnel, developing their successors and certain internal processes to reduce our reliance on specific individuals, and on properly managing the transition of key roles when they occur. For example, in September 2005, Navdeep Sooch, our chairman of the board, departed from his role as interim CEO when Necip Sayiner was appointed as president and CEO. There is currently a shortage of qualified personnel with significant experience in the design, development, manufacturing, marketing and sales of analog and mixed-signal ICs. In particular, there is a shortage of engineers who are familiar with the intricacies of the design and manufacturability of analog elements, and competition for such personnel is intense. Our key technical personnel represent a significant asset and serve as the primary source for our technological and product innovations. We may not be successful in attracting and retaining sufficient numbers of technical personnel to support our anticipated growth. The loss of any of our key employees or the inability to attract or retain qualified personnel both in the United States and internationally, including engineers, sales, applications and marketing personnel, could delay the development and introduction of, and negatively impact our ability to sell, our products.
As part of our growth and product diversification strategy, we continue to evaluate opportunities to acquire other businesses, intellectual property or technologies that would complement our current offerings, expand the breadth of our markets or enhance our technical capabilities. The Cygnal Integrated Products (Cygnal) and Silicon MAGIKE acquisitions and other acquisitions that we may potentially make in the future entail a number of risks that could materially and adversely affect our business and operating results, including:
· problems integrating the acquired operations, technologies or products with our existing business and products;
· diversion of managements time and attention from our core business;
· need for financial resources above our planned investment levels;
· difficulties in retaining business relationships with suppliers and customers of the acquired company;
· risks associated with entering markets in which we lack prior experience;
· risks associated with the transfer of licenses of intellectual property;
· acquisition-related disputes, including disputes over earn-outs and escrows;
· potential loss of key employees of the acquired company; and
· potential impairment of related goodwill and intangible assets.
Future acquisitions also could cause us to incur debt or contingent liabilities or cause us to issue equity securities that could negatively impact the ownership percentages of existing shareholders.
The market price of our common stock has been volatile in the past and may be volatile in the future. The market price of our common stock may be significantly affected by the following factors:
· actual or anticipated fluctuations in our operating results;
· changes in financial estimates by securities analysts or our failure to perform in line with such estimates;
· changes in market valuations of other technology companies, particularly semiconductor companies;
· announcements by us or our competitors of significant technical innovations, acquisitions, strategic partnerships, joint ventures or capital commitments;
· introduction of technologies or product enhancements that reduce the need for our products;
· the loss of, or decrease in sales to, one or more key customers;
· a large sale of stock by a significant shareholder;
· dilution from the issuance of our stock in connection with acquisitions;
· the addition or removal of our stock to or from a stock index fund;
· departures of key personnel; and
· the required expensing of stock options.
The stock market has experienced extreme volatility that often has been unrelated to the performance of particular companies. These market fluctuations may cause our stock price to fall regardless of our performance.
MOST OF OUR CURRENT MANUFACTURERS, ASSEMBLERS, TEST SERVICE PROVIDERS, AND CUSTOMERS ARE CONCENTRATED IN THE SAME GEOGRAPHIC REGION, WHICH INCREASES THE RISK THAT A NATURAL DISASTER, EPIDEMIC, LABOR STRIKE, WAR OR POLITICAL UNREST COULD DISRUPT OUR OPERATIONS OR SALES
Most of TSMCs foundries and one of our assembly and test subcontractors sites are primarily located in the same region within Taiwan and our other assembly and test subcontractors are located in the Pacific Rim region. In addition, many of our customers, particularly mobile handset manufacturers, are located in the Pacific Rim region. The risk of earthquakes in Taiwan and the Pacific Rim region is significant due to the proximity of major earthquake fault lines in the area. We are not currently covered by insurance against business disruption caused by earthquakes as such insurance is not currently available on terms that we believe are commercially reasonable. Earthquakes, fire, flooding, lack of water or other natural disasters in Taiwan or the Pacific Rim region, or an epidemic, political unrest, war, labor strikes or work stoppages in countries where our semiconductor manufacturer, assemblers and test subcontractors are located, likely would result in the disruption of our foundry, assembly or test capacity. There can be no assurance that such alternate capacity could be obtained on favorable terms, if at all.
A natural disaster, epidemic, labor strike, war or political unrest where our customers facilities are located would likely reduce our sales to such customers. For example, Samsung, our largest customer, is based in South Korea and represented 14% of our revenues during fiscal 2005. North Koreas decision to withdraw from the nuclear Non-Proliferation Treaty and related geopolitical maneuverings has created unrest. Such unrest could create economic uncertainty or instability, could escalate to war or otherwise adversely affect South Korea and our South Korean customers and reduce our sales to such customers, which would materially and adversely affect our operating results. In addition, a significant portion of the assembly and testing of our mobile handset products occurs in South Korea. Any disruption resulting from these events could also cause significant delays in shipments of our products until we are able to shift our manufacturing, assembling or testing from the affected subcontractor to another third party vendor.
WE MAY BE UNABLE TO PROTECT OUR INTELLECTUAL PROPERTY, WHICH WOULD NEGATIVELY AFFECT OUR ABILITY TO COMPETE
Our products rely on our proprietary technology, and we expect that future technological advances made by us will be critical to sustain market acceptance of our products. Therefore, we believe that the protection of our intellectual property rights is and will continue to be important to the success of our business. We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We also enter into confidentiality or license agreements with our employees, consultants, intellectual property providers and business partners, and control access to and distribution of our documentation and other proprietary information. Despite these efforts, unauthorized parties may attempt to copy or otherwise obtain and use our proprietary technology. Monitoring unauthorized use of our technology is difficult, and we cannot be certain that the steps we have taken will prevent unauthorized use of our technology, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. We cannot be certain that patents will be issued as a result of our pending applications nor can we be certain that any issued patents would protect or benefit us or give us adequate protection from competing products. For example, issued patents may be circumvented or challenged and declared invalid or unenforceable. We also cannot be certain that others will not develop effective competing technologies on their own.
THE SEMICONDUCTOR MANUFACTURING PROCESS IS HIGHLY COMPLEX AND, FROM TIME TO TIME, MANUFACTURING YIELDS MAY FALL BELOW OUR EXPECTATIONS, WHICH COULD RESULT IN OUR INABILITY TO SATISFY DEMAND FOR OUR PRODUCTS IN A TIMELY MANNER
The manufacture of our products is a highly complex and technologically demanding process. Although we work closely with our foundries to minimize the likelihood of reduced manufacturing yields, our foundries from time to time have experienced lower than anticipated manufacturing yields. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by our foundries could result in lower than anticipated manufacturing yields or unacceptable performance deficiencies. If our foundries fail to deliver fabricated silicon wafers of satisfactory quality in a timely manner, we will be unable to meet our customers demand for our products in a timely manner, which would adversely affect our operating results and damage our customer relationships.
Our products are currently used by our customers to produce modems, telephony equipment, mobile handsets, networking equipment and a broad range of other devices. We rely on our customers to provide hardware, software, intellectual property indemnification and other technical support for the products supplied by our customers. If our customers do not provide the required functionality or if our customers do not provide satisfactory support for their products, the demand for these devices that incorporate our products may diminish or we may otherwise be materially adversely affected. Any reduction in the demand for these devices would significantly reduce our revenues.
In certain products such as the DAA, some of our customers (including Agere Systems and Conexant) offer their own competitive products. These customers may find it advantageous to support their own offerings in the marketplace in lieu of promoting our products.
In recent years, there has been significant litigation in the United States involving patents and other intellectual property rights. From time to time, we receive letters from various industry participants alleging infringement of patents, trademarks or misappropriation of trade secrets or from customers requesting indemnification for claims brought against them by third parties. The exploratory nature of these inquiries has become relatively common in the semiconductor industry. We respond when appropriate and as advised by legal counsel. We have been involved in litigation to protect our intellectual property rights in the past and may become involved in such litigation again in the future. For example, in April 2003, we paid $17 million to settle patent infringement claims brought against us by TDK Semiconductor Corporation. In February 2004, we filed a lawsuit against a former employee and Axiom Microdevices alleging theft of trade secrets. In September 2004, we added claims for patent infringement to such suit. In December 2005, Power-One, Inc. filed a lawsuit against us alleging patent infringement related to our digital power supply products. In the future, we may become involved in additional litigation to defend allegations of infringement asserted by others, both directly and indirectly as a result of certain industry-standard indemnities we may offer to our customers. Legal proceedings could subject us to significant liability for damages or invalidate our proprietary rights. Legal proceedings initiated by us to protect our intellectual property rights could also result in counterclaims or countersuits against us. Any litigation, regardless of its outcome, would likely be time-consuming and expensive to resolve and would divert our managements time and attention. Most intellectual property litigation also could force us to take specific actions, including:
· cease selling products that use the challenged intellectual property;
· obtain from the owner of the infringed intellectual property a right to a license to sell or use the relevant technology, which license may not be available on reasonable terms, or at all;
· redesign those products that use infringing intellectual property; or
· pursue legal remedies with third parties to enforce our indemnification rights, which may not adequately protect our interests.
We believe that our existing cash, cash equivalents and investments will be sufficient to meet our working capital needs, capital expenditures, investment requirements and commitments for at least the next 12 months. However, it is possible that we may need to raise additional funds to finance our activities or to facilitate acquisitions of other businesses, products, intellectual property or technologies. We believe we could raise these funds, if needed, by selling equity or debt securities to the public or to selected investors. In addition, even though we may not need additional funds, we may still elect to sell additional equity or debt securities or obtain credit facilities for other reasons. However, we may not be able to obtain additional funds on favorable terms, or at all. If we decide to raise additional funds by issuing equity or convertible debt securities, the ownership percentages of existing shareholders would be reduced.
Some of our current and potential competitors have longer operating histories, significantly greater resources and name recognition and a larger base of customers than we have. As a result, these competitors may have greater credibility with our existing and potential customers. They also may be able to adopt more aggressive pricing policies and devote greater resources to the development, promotion and sale of their products than we can to ours. In addition, some of our current and potential competitors have already established supplier or joint development relationships with the decision makers at our current or potential customers. These competitors may be able to leverage their existing relationships to discourage their customers from purchasing products from us or persuade them to replace our products with their products. Our competitors may also offer bundled chipset kit arrangements offering a more complete product despite the technical merits or advantages of our products. These competitors may elect not to support our products which could complicate our sales efforts. These and other competitive pressures may prevent us from competing successfully against current or future competitors, and may materially harm our business. Competition could decrease our prices, reduce our sales, lower our gross profits or decrease our market share.
Provisions of our certificate of incorporation and bylaws could have the effect of discouraging, delaying or preventing a merger or acquisition that a stockholder may consider favorable. For example, our certificate of incorporation and bylaws provide for:
· the division of our board of directors into three classes to be elected on a staggered basis, one class each year;
· the ability of our board of directors to issue shares of our preferred stock in one or more series without further authorization of our stockholders;
· a prohibition on stockholder action by written consent;
· elimination of the right of stockholders to call a special meeting of stockholders;
· a requirement that stockholders provide advance notice of any stockholder nominations of directors or any proposal of new business to be considered at any meeting of stockholders; and
· a requirement that a supermajority vote be obtained to amend or repeal certain provisions of our certificate of incorporation.
We also are subject to the anti-takeover laws of Delaware which may discourage, delay or prevent someone from acquiring or merging with us, which may adversely affect the market price of our common stock.
We do not generally obtain letters of credit or other security for payment from customers, distributors or contract manufacturers. Accordingly, we are not protected against accounts receivable default or bankruptcy by these entities. Our ten largest customers or distributors represent a substantial majority of our accounts receivable. If any such customer or distributor were to become insolvent or otherwise not satisfy their obligations to us, we could be materially harmed.
THE PERFORMANCE OF OUR PRODUCTS MAY BE ADVERSELY AFFECTED BY SEVERE ENVIRONMENTAL CONDITIONS THAT MAY REQUIRE MODIFICATIONS, WHICH COULD LEAD TO AN INCREASE IN OUR COSTS OR A REDUCTION IN OUR REVENUES
For example, although our DSL AFE and modem related products are compliant with published specifications, these established specifications might not adequately address all conditions that must be satisfied in order to operate in harsh environments. This includes environments where there are wide variations in electrical quality, telephone line quality, static electricity and operating temperatures or that may be affected by lightning or improper handling by customers and end users. These environmental factors may result in unanticipated returns of our products. Any necessary modifications could cause us to incur significant re-engineering costs, divert the attention of our engineering personnel from our product development efforts and cause significant customer relations and business reputation problems.
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. The industry has experienced significant fluctuations, often connected with, or in anticipation of, maturing product cycles and new product introductions of both semiconductor companies and their customers products and fluctuations in general economic conditions.
Downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. For example, in fiscal 2001, the semiconductor industry suffered a downturn due to reductions in the actual unit sales of personal computers and wireless phones as compared to previous robust forecasts. This downturn resulted in a material adverse effect on our business and operating results in fiscal 2001.
Upturns have been characterized by increased product demand and production capacity constraints created by increased competition for access to third party foundry, assembly and test capacity. We are dependent on the availability of such capacity to manufacture, assemble and test our ICs. None of our third party foundry, assembly or test subcontractors have provided assurances that adequate capacity will be available to us.
We may experience substantial period-to-period fluctuations in future operating results due to the erosion of our average selling prices, particularly for mobile handset products. We have reduced the average unit price of our products in anticipation of or in response to competitive pricing pressures, new product introductions by us or our competitors and other factors. If we are unable to offset any such reductions in our average selling prices by increasing our sales volumes, increasing our sales content per application or reducing production costs, our gross profits and revenues will suffer. To maintain our gross profit percentage, we will need to develop and introduce new products and product enhancements on a timely basis and continually reduce our costs. Our failure to do so would cause our revenues and gross profit percentage to decline.
The markets for semiconductors in general, and for mixed signal ICs in particular, are intensely competitive. We expect that the market for our products will continually evolve and will be subject to rapid technological change. In addition, as we target and supply products to numerous markets and applications, we face competition from a relatively large number of competitors. Across all of our product areas, we compete with Agere Systems, Atmel, Analog Devices, Broadcom, Conexant, Cypress, Freescale, Fujitsu, Infineon Technologies, Legerity, Maxim Integrated Products, MediaTek, Microchip, National Semiconductor, Philips, Renesas, RF Micro Devices, Semtech, Skyworks Solutions, Texas Instruments and others. We expect to face competition in the future from our current competitors, other manufacturers and designers of semiconductors, and start-up semiconductor design companies. Some of our customers, such as Agere Systems, Intel, and Samsung, are also large, established semiconductor suppliers. Our sales to and support of these customers may enable them to become a source of competition to us, despite our efforts to protect our intellectual property rights. As the markets for communications products grow, we also may face competition from traditional communications device companies. These companies may enter the mixed signal semiconductor market by introducing their own ICs or by entering into strategic relationships with or acquiring other existing providers of semiconductor products.
In addition, large companies may restructure their operations to create separate companies or may acquire new businesses that are focused on providing the types of products we produce or acquire our customers. For example, in May 2003, Conexant acquired PC-Tels modem business. Conexant has sought, and will likely continue to seek, to supplant our silicon DAA products that have been incorporated in PC-Tel products with Conexants own competing DAA product. In 2004, Motorola separated its semiconductor operations into Freescale Semiconductor, a publicly traded company focused on communications and integrated electronic systems. As an additional example, in February 2004, Conexant and GlobespanVirata merged to form a company focused on communication semiconductors. This combined entity will focus on all broadband applications and may compete with our DAA, ISOmodem and asymmetric digital subscriber line (ADSL) product lines.
Generally, our products comprise only a part of a device. All components of such devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in affecting industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or end users. If larger companies do not support the same industry standards that we do, or if competing standards emerge, market acceptance of our products could be adversely affected which would harm our business.
Products for communications applications are based on industry standards that are continually evolving. For example, GSM mobile handsets now commonly use the GPRS specification for enabling data communications, but there is an accelerating trend toward the EDGE protocol. Other suppliers, including us, are now offering mobile handset devices utilizing the EDGE protocol to support higher data communication rates on GSM networks. In addition, certain suppliers are now offering mobile handset devices utilizing the WCDMA protocol to support higher data communication rates on WCDMA networks. We do not currently have a WCDMA mobile handset product. Our ability to compete in the future will depend on our ability to identify and ensure compliance with these evolving industry standards. The emergence of new industry standards could render our products incompatible with products developed by other suppliers. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins.
Our pursuit of necessary technological advances may require substantial time and expense. We may not be successful in developing or using new technologies or in developing new products or product enhancements that achieve market acceptance. If our ICs fail to achieve market acceptance, our growth prospects, operating results and competitive position could be adversely affected.
Our Internet website address is http://www.silabs.com. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available through the investor relations page of our Internet website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (SEC). Our Internet website and the information contained therein or connected thereto are not intended to be incorporated into this Annual Report on Form 10-K.
Our primary facilities, housing test operations, sales and marketing, research and development, and administration, are located in Austin, Texas. These facilities consist of approximately 230,000 square feet of leased floor space with lease terms expiring at various dates through April 2010. In addition to these properties, we lease facilities in New Hampshire for engineering activities and various other smaller locations throughout the United States, China, England, France, Germany, Hong Kong, Japan, South Korea, Malaysia, Singapore and Taiwan for sales, marketing, administrative, design and manufacturing support activities.
We believe that these facilities are suitable and adequate to meet our current operating needs.
On December 6, 2001, a class action complaint for violations of U.S. federal securities laws was filed in the United States District Court for the Southern District of New York against us, four of our officers individually and the three investment banking firms who served as representatives of the underwriters in connection with our initial public offering of common stock. The Consolidated Amended Complaint alleges that the registration statement and prospectus for our initial public offering did not disclose that (1) the underwriters solicited and received additional, excessive and undisclosed commissions from certain investors, and (2) the underwriters had agreed to allocate shares of the offering in exchange for a commitment from the customers to purchase additional shares in the aftermarket at pre-determined higher prices. The action seeks damages in an unspecified amount and is being coordinated with approximately 300 other nearly identical actions filed against other companies. A court order dated October 9, 2002 dismissed without prejudice our four officers who had been named individually. On February 19, 2003, the Court denied the motion to dismiss the complaint against us. On October 13, 2004, the Court certified a class in six of the approximately 300 other nearly identical actions and noted that the decision is intended to provide strong guidance to all parties regarding class certification in the remaining cases. Plaintiffs have not yet moved to certify a class in the Silicon Laboratories case. We have approved a settlement agreement and related agreements which set forth the terms of a settlement between us, the plaintiff class and the vast majority of the other approximately 300 issuer defendants. Among other provisions, the settlement provides for a release of us and the individual defendants for the conduct alleged in the action to be wrongful. We would agree to undertake certain responsibilities, including agreeing to assign away, not assert, or release certain potential claims we may have against our underwriters. The settlement agreement also provides a guaranteed recovery of $1 billion to plaintiffs for the cases relating to all of the approximately 300 issuers. To the extent that the underwriter defendants settle all of the cases for at least $1 billion, no payment will be required under the issuers settlement agreement. To the extent that the underwriter defendants settle for less than $1 billion, the issuers are required to make up the difference. We anticipate that our potential financial obligation to plaintiffs pursuant to the terms of the settlement agreement and related agreements will be covered by existing insurance. We are not aware of any material limitations on the expected recovery of any potential financial obligation to plaintiffs from our insurance carriers. Our carriers appear to be solvent, and we are not aware of any uncertainties as to the legal sufficiency of an insurance claim with respect to any recovery by plaintiffs. Therefore, we do not expect that the settlement would involve any material payment by us. Furthermore, even if our insurance were unavailable due to insurer insolvency or otherwise, we expect that our maximum financial obligation to plaintiffs pursuant to the settlement agreement would be less than $3.4 million. On February 15, 2005, the Court granted preliminary approval of the settlement agreement, subject to certain modifications consistent with its opinion. Those modifications have been made. There is no assurance that the Court will grant final approval to the settlement. If the settlement agreement is not approved and we are found liable, we are unable to estimate or predict the potential damages that might be awarded, whether such damages would be greater than our insurance coverage, or whether the outcome would have a material impact on our results of operations or financial position.
On February 17, 2004, we filed a lawsuit against a former employee and Axiom Microdevices Inc., a California corporation, in the United States District Court for the Western District of Texas, Austin Division, alleging theft of trade secrets by the individual and Axiom. The lawsuit also alleges that the employee breached his ethical, contractual and fiduciary obligations to us by disclosing trade secrets and confidential information to Axiom and that Axiom tortiously interfered with the employees contractual obligations to us. On September 14, 2004, we added claims for infringement of United States Patents 6,549,071 and 6,788,141 to the pending suit. The patents relate to our proprietary technology for CMOS RF power amplifiers. At this time, we cannot estimate the outcome of this matter or resulting financial impact to us, if any.
On December 14, 2005, Power-One, Inc. (Power-One), a Delaware corporation, filed a lawsuit against us, in the United States District Court for the Eastern District of Texas, Marshall Division, alleging infringement of United States Patents 6,936,999 and 6,949,916, and of patent applications Nos. 2004/0123164A1 and 2004/0093533A1. The lawsuit relates to our Si825x family of digital power supply controllers and alleges that the infringement was and continues to be willful. At this time, we cannot estimate the outcome of this matter or resulting financial impact to us, if any.
We are involved in various other legal proceedings that have arisen in the normal course of business. While the ultimate results of these matters cannot be predicted with certainty, we do not expect them to have a material adverse effect on the consolidated financial position or results of operations.
Our registration statement (Registration No. 333-94853) under the Securities Act of 1933, as amended, relating to our initial public offering of our common stock became effective on March 23, 2000. Our common stock is quoted on the Nasdaq National Market (Nasdaq) under the symbol SLAB. The table below shows the high and low per-share sales prices of our common stock for the periods indicated, as reported by Nasdaq. As of February 1, 2006, there were 230 holders of record of our common stock.
We have never declared or paid any cash dividends on our common stock and we do not intend to pay cash dividends in the foreseeable future. We currently expect to retain any future earnings to fund the operation and expansion of our business.
No securities were repurchased during the fourth quarter of fiscal 2005.
The selected consolidated balance sheet data as of fiscal year ended 2005 and 2004 and the selected consolidated statements of operations data for fiscal 2005, 2004 and 2003 have been derived from the audited consolidated financial statements included in this Form 10-K. The selected consolidated balance sheet data as of fiscal year ended 2003, 2002 and 2001 and the selected consolidated statements of operations data for fiscal 2002 and 2001 have been derived from audited consolidated financial statements not included in this Form 10-K. You should read this selected consolidated financial data in conjunction with Managements Discussion and Analysis of Financial Condition and Results of Operations, our consolidated financial statements and the notes to those statements included in this Form 10-K.
THE FOLLOWING DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS SHOULD BE READ IN CONJUNCTION WITH THE CONSOLIDATED FINANCIAL STATEMENTS AND RELATED NOTES THERETO INCLUDED ELSEWHERE IN THIS REPORT ON FORM 10-K. THIS DISCUSSION CONTAINS FORWARD-LOOKING STATEMENTS. PLEASE SEE THE CAUTIONARY STATEMENT ABOVE AND RISK FACTORS UNDER ITEM 1A FOR A DISCUSSION OF THE UNCERTAINTIES, RISKS AND ASSUMPTIONS ASSOCIATED WITH THESE STATEMENTS. OUR FISCAL YEAR-END FINANCIAL REPORTING PERIODS ARE A 52- OR 53- WEEK YEAR ENDING ON THE SATURDAY CLOSEST TO DECEMBER 31ST. FISCAL 2005 HAD 52 WEEKS AND ENDED ON DECEMBER 31, 2005. FISCAL 2004 HAD 52 WEEKS AND ENDED ON JANUARY 1, 2005. FISCAL 2003 HAD 53 WEEKS WITH THE EXTRA WEEK OCCURRING IN THE FOURTH QUARTER OF THE YEAR AND ENDED ON JANUARY 3, 2004.
We design and develop proprietary, analog-intensive, mixed-signal integrated circuits (ICs) for a broad range of applications. Our innovative ICs can dramatically reduce the cost, size and system power requirements of the products that our customers sell. We currently offer ICs that can be incorporated into communications devices, such as wireless phones and modems, as well as cable and satellite set-top boxes, residential communication gateways for cable or digital subscriber line (DSL), FM broadcast radio tuners and networking equipment. We also offer a family of 8-bit microcontrollers (MCUs) for use in a broad array of applications such as industrial automation and control, automotive sensors and controls, medical instrumentation, and electronic test and measurement equipment. Our major customers include Advanced Digital Broadcast, Agere Systems, Apple, Conexant, Intel, LG Electronics, Motorola, Sagem, Samsung and Thomson.
Our company was founded in 1996. Our business has grown since our inception, as reflected by our employee headcount, which increased to 651 at the end of fiscal 2005, from 588 employees at the end of fiscal 2004 and 486 employees at the end of fiscal 2003. As a fabless semiconductor company, we rely on third-party semiconductor fabricators in Asia, and to a lesser extent the United States, to manufacture the silicon wafers that reflect our IC designs. Each wafer contains numerous die, which are cut from the wafer to create a chip for an IC. We rely on third-parties in Asia to assemble, package, and, in the substantial majority of cases, test these devices and ship these units to our customers. We also rely on third-party providers of software to supply a complete AeroFONE mobile handset solution to our customers. We have increased the portion of testing performed by such third parties, which facilitates faster delivery of products to our customers (particularly those located in Asia), shorter production cycle times, lower inventory requirements, lower costs and increased flexibility of test capacity.
Our product set has expanded to a broad portfolio targeting mobile handset and broad-based mixed-signal applications. Our expertise in analog-intensive, high-performance, mixed-signal ICs enables us to develop highly differentiated solutions that address multiple markets. For example, our silicon direct access arrangement (DAA) product family is optimized for the personal computer (PC) modem market; our ISOmodem® family of embedded modems has been widely adopted by satellite set-top box manufacturers; and our Aero GSM/GPRS transceiver family is being shipped in mobile handsets worldwide. We continue to introduce next generation ICs with added functionality and further integration. In April 2005, we introduced a family of FM broadcast radio tuner products and a family of digital power products. In August 2005, we introduced families of oscillators (XOs) and voltage-controlled oscillators (VCXOs). In September 2005, we introduced the Aero IIe single-chip EDGE transceiver and the fax ISOmodem embedded modem. In October 2005, we introduced the AeroFONE single-chip phone and the Quad ProSLIC. In November 2005, we introduced the SiRX satellite receivers. Through acquisitions and internal development efforts, we have continued to further diversify our product portfolio. We plan to continue to diversify our product portfolio by introducing products that increase the content we provide for existing applications and by introducing ICs for markets we do not currently address, thereby expanding our total available market opportunity.
We group our products into two categories, mobile handset products and broad-based mixed-signal products. Mobile handset products include our Aero Transceivers, the AeroFONE single-chip phone, Power Amplifiers, and to the extent incorporated into handsets, FM broadcast radio tuners. Broad-based mixed-signal products include our silicon DAA, ISOmodem embedded modems, ProSLIC telephony interface circuits, microcontroller products, DSL analog front end, SiPHY optical physical layer transceivers, precision clock & data recovery ICs (CDRs), XM satellite radio tuner, digital power products, FM broadcast radio tuners for non-handset applications, oscillators (XOs), voltage-controlled oscillators (VCXOs), general purpose RF Synthesizers and SiRX satellite receivers.
During fiscal 2005, 2004 and 2003, one customer, Samsung, represented 14%, 17% and 21% of our revenues, respectively. No other single end customer accounted for more than 10% of our revenues in any of these years. In addition to direct sales to customers, some of our end customers purchase products indirectly from us through distributors and contract manufacturers. An end customer purchasing through a contract manufacturer typically instructs such contract manufacturer to obtain our products and incorporate such products with other components for sale by such contract manufacturer to the end customer. Although we actually sell the products to, and are paid by, the distributors and contract manufacturers, we refer to such end customer as our customer. Two of our distributors, Edom Technology and Uniquest, each selling products to customers in Asia, represented 29% and 11% of our fiscal 2005 revenues, respectively. Edom and Uniquest represented 20% and 12% of our fiscal 2004 revenues, respectively, and Edom accounted for 13% of our total revenues during fiscal 2003. There were no other distributors or contract manufacturers that accounted for more than 10% of our revenues in fiscal years 2005, 2004 or 2003.
The percentage of our revenues derived from customers located outside of the United States was 91% in fiscal 2005, 89% in fiscal 2004 and 80% in fiscal 2003. This percentage increase in the two most recent years reflects our product and customer diversification and increased market penetration for our products, as many of our mobile handset, and increasingly, broad-based mixed-signal customers manufacture and design their products in Asia. All of our revenues to date have been denominated in U.S. dollars. We believe that a majority of our revenues will continue to be derived from customers outside of the United States.
The sales cycle for the test and evaluation of our ICs can range from one month to 12 months or more. An additional three to six months or more are usually required before a customer ships a significant volume of devices that incorporate our ICs. Due to this lengthy sales cycle, we typically experience a significant delay between incurring expenses for research and development and selling, general and administrative efforts, and the generation of corresponding sales. Consequently, if sales in any quarter do not occur when expected, expenses and inventory levels could be disproportionately high, and our operating results for that quarter and, potentially, future quarters would be adversely affected. Moreover, the amount of time between initial research and development and commercialization of a product, if ever, can be substantially longer than the sales cycle for the product. Accordingly, if we incur substantial research and development costs without developing a commercially successful product, our operating results, as well as our growth prospects, could be adversely affected.
Because many of our ICs are designed for use in consumer products such as PCs, personal video recorders, set-top boxes and mobile handsets, we expect that the demand for our products will be typically subject to some degree of seasonal demand resulting in increased sales in the third and fourth quarters of each year when customers place orders to meet holiday demand. However, rapid changes in our markets and across our product areas make it difficult for us to accurately estimate the impact of seasonal factors on our business.
The following describes the line items set forth in our consolidated statements of income:
REVENUES. Revenues are generated almost exclusively by sales of our ICs. We recognize revenue on sales when all of the following criteria are met: 1) there is persuasive evidence that an arrangement exists, 2) delivery of goods has occurred, 3) the sales price is fixed or determinable, and 4) collectibility is reasonably assured. Generally, we recognize revenue from product sales direct to customers and contract manufacturers upon shipment. Certain of our sales are made to distributors under agreements allowing certain rights of return and price protection on products unsold by distributors. Accordingly, we defer the revenue and cost of revenue on such sales until the distributors sell the product to the end customer. Our products typically carry a one-year replacement warranty. Replacements have been insignificant to date. Our revenues are subject to variation from period to period due to the volume of shipments made within a period and the prices we charge for our products. The vast majority of our revenues were negotiated at prices that reflect a discount from the list prices for our products. These discounts are made for a variety of reasons, including: 1) to establish a relationship with a new customer, 2) as an incentive for customers to purchase products in larger volumes, 3) to provide profit margin to our distributors who resell our products or 4) in response to competition. In addition, as a product matures, we expect that the average selling price for such product will decline due to the greater availability of competing products. Our ability to increase revenues in the future is dependent on increased demand for our established products and our ability to ship larger volumes of those products in response to such demand, as well as our ability to develop or acquire new products and subsequently achieve customer acceptance of newly introduced products.
COST OF REVENUES. Cost of revenues includes the cost of purchasing finished silicon wafers processed by independent foundries; costs associated with assembly, test and shipping of those products; costs of personnel and equipment associated with manufacturing support, logistics and quality assurance; costs of software royalties and amortization of purchased software, other intellectual property license costs, and certain acquired intangible assets; an allocated portion of our occupancy costs; allocable depreciation of testing equipment and leasehold improvements; and impairment charges related to certain manufacturing equipment held for sale or abandoned; and, for prior periods, a portion of the settlement costs associated with the TDK patent infringement lawsuit. Generally, we depreciate equipment over four years on a straight-line basis and leasehold improvements over the shorter of the estimated useful life or the applicable lease term. Recently introduced products tend to have higher cost of revenues per unit due to initially low production volumes required by our customers and higher costs associated with new package variations. Generally, as production volumes for a product increase, unit production costs tend to decrease as our yields improve and our semiconductor fabricators, assemblers and test suppliers achieve greater economies of scale for that product. Additionally, the cost of wafer procurement and assembly and test services, which are significant components of cost of goods sold, vary cyclically with overall demand for semiconductors and our suppliers available capacity of such products and services.
RESEARCH AND DEVELOPMENT. Research and development expense consists primarily of compensation, including stock compensation, and related costs of employees engaged in research and development activities, new product mask, wafer, packaging and test costs, external consulting and services costs, amortization of purchased software, equipment tooling, equipment depreciation, amortization of acquired intangible assets, acquired research and development, as well as an allocated portion of our occupancy costs for such operations. We generally depreciate our research and development equipment over four years and amortize our purchased software from computer-aided design tool vendors over three to four years. Research and development activities include the design of new products and software, refinement of existing products and design of test methodologies to ensure compliance with required specifications.
SELLING, GENERAL AND ADMINISTRATIVE. Selling, general and administrative expense consists primarily of personnel-related expenses, including stock compensation, related allocable portion of our occupancy costs, sales commissions to independent sales representatives, applications engineering support, professional fees, directors and officers liability insurance, patent litigation legal fees, other promotional and marketing expenses, and reserves for bad debt.
WRITE OFF OF IN-PROCESS RESEARCH & DEVELOPMENT. Write off of in-process research & development reflects the write off of in-process research and development costs which we acquired in connection with our acquisition of Cygnal in fiscal 2003.
INTEREST INCOME. Interest income reflects interest earned on average cash, cash equivalents and investment balances. We generally invest in tax-exempt short-term investments.
INTEREST EXPENSE. Interest expense consists of interest on our short and long-term obligations.
OTHER INCOME (EXPENSE), NET. Other income (expense), net primarily reflects our share of income and losses related to our equity investments and the gain on the disposal of fixed assets.
PROVISION FOR INCOME TAXES. We accrue a provision for domestic and foreign income tax at the applicable statutory rates adjusted for non-deductible expenses, research and development tax credits and interest income from tax-exempt short-term investments.
The following table sets forth our consolidated statements of income data as a percentage of revenues for the periods indicated:
COMPARISON OF FISCAL 2005 TO FISCAL 2004
Mobile Handsets: The decline in the sales of our mobile handset products in fiscal 2005 was primarily driven by declining average selling prices of our Aero Transceiver family of products. Average selling prices in mobile handset products decreased year over year by 20.6%. This decrease was offset in part by a 3.8% year over year increase in unit volumes of our mobile handset products.
Broad-Based Mixed-Signal: The growth in the sales of our broad-based mixed-signal products in fiscal 2005 was primarily driven by increased revenues from our: (1) ProSLIC products reflecting growth in demand and market share gains in the VoIP market; and (2) microcontroller products, a business that we acquired in the fourth quarter of fiscal 2003. Such growth was offset in part by a 10% decline in revenue from our modem products (consisting of our DAA and ISOmodem products) due to declines in average selling prices and unit volumes. Unit volumes of broad-based mixed-signal products increased year over year by 1.6%. In addition, average selling prices in this area increased year over year by 2.6%.
As our products become more mature, we expect to experience decreases in average selling prices in the future. Our revenues will be dependent on our ability to increase sales volumes and introduce higher priced, next generation products and product extensions.
The year over year decrease in gross profit dollars in fiscal 2005 was primarily due to the decrease in revenues from our mobile handset products. We expect to experience declines in the average selling prices of our mobile handset products and certain of our broad-based mixed-signal products, especially with respect to our modem products. This downward pressure on gross profit as a percentage of revenues may be offset to the extent we are able to: 1) introduce higher margin new products and continue to gain market share with our broad-based mixed-signal ICs; or 2) achieve lower production costs from our wafer foundries and third-party assembly and test sub-contractors.
The year over year increase in research and development expense in fiscal 2005 was principally due to a $13.7 million charge for acquired research and development costs in connection with our acquisition of Silicon MAGIKE, increased staffing and associated occupancy and other costs to pursue new product development opportunities, and to continue to develop software and new testing methodologies for newly introduced and existing products. Some of our more significant development projects in the mobile-handset product area included the AeroFONE single-chip phone, the Aero IIe single-chip EDGE transceiver and the FM broadcast radio tuners for handsets. Significant development projects in the broad-based mixed-signal product area included families of oscillators (XOs) and voltage-controlled oscillators (VCXOs), the fax ISOmodem embedded modem, digital power products and the SiRX satellite receivers. All of these development projects have either been completed or are scheduled to be completed over the next twelve months. Additionally, many of these new products are being sampled by certain of our customers and are in the design-in phase. With the exception of the FM broadcast radio tuners, we dont expect the products derived from these projects to begin to contribute to revenues in a meaningful way before late fiscal 2006. Excluding the $13.7 million charge for acquired research and development costs in connection with the acquisition of Silicon MAGIKE, we expect that research and development expense will increase in absolute dollars in future periods as we continue to increase our staffing and associated costs to pursue additional new product development opportunities, and may fluctuate as a percentage of revenues due to changes in sales and the timing of certain expensive items related to new product development initiatives, such as engineering mask and wafer costs. We also expect research and development expense to increase in future periods due to our adoption of Financial Accounting Standards Board (FASB) Statement of Financial Accounting Standards (SFAS) 123 (revised 2004), Share-Based Payment, (SFAS 123R).
We identified and valued three research and development projects in connection with the acquisition of Silicon MAGIKE, including Voice, High Voltage and other power-related technologies. At the date of acquisition, the acquired technology had no alternative future use and did not otherwise qualify for capitalization. We estimate that these projects ranged from 25% to 60% complete at the time of the acquisition. The remaining research and development efforts include layout, mask set, integration and testing the product. The significant risks associated with the successful completion of these projects include our potential inability to finish the complex designs, produce sample versions of the integrated circuits which operate at the required technical specifications, and gain customer acceptance of the parts. Failure to complete these projects in a timely manner could result in lost revenues. Completion costs to date on all projects have been consistent with estimates made at the time of the acquisition. The estimated cost to complete these projects was expected to be approximately $6.2 million in the aggregate as of December 31, 2005. The Company doesnt expect the products derived from these technologies to begin to contribute to revenues prior to fiscal 2007.
The increase in the dollar amount of selling, general and administrative expense in fiscal 2005 was principally attributable to: (1) an increase of approximately $2.8 million for increased staffing and associated costs resulting from the geographical expansion of our sales support organization in Asia and Europe; (2) $2.7 million in charges related to the separation agreement with our former Chief Executive Officer; (3) $1.0 million in charges related to the search and hiring costs of our current Chief Executive Officer; and (4) an increase of approximately $1.0 million for increased staffing and associated costs related to the expansion of our internal information technology and services support organization. The increase was offset in part by a $1.9 million decline in sales commissions and bonuses due to a decline in our sales. We expect that selling, general and administrative expense will increase in absolute dollars in future periods as we continue to expand our sales channels, marketing applications efforts and administrative infrastructure. In addition, we expect selling, general and administrative expense to fluctuate as a percentage of revenues because of (1) potential significant variability in our future revenues; (2) increased support costs related to new product introduction; and (3) fluctuating legal costs related to litigation and intellectual property matters. We also expect selling, general and administrative expense to increase in future periods due to our adoption of SFAS 123R.
The increase in the dollar amount of interest income in fiscal 2005 was due to a greater amount of cash and short-term investments balances during the year ended December 31, 2005 and due to an increase in the interest rates of the underlying instruments during fiscal 2005.
Interest expense was $0.3 million in both fiscal 2005 and 2004.
Other income (expense), in fiscal 2004 primarily reflected gains on the sale of test equipment. No comparable gains occurred in fiscal 2005.
The effective tax rate in fiscal 2005 was lower than fiscal 2004, primarily due to the tax savings from alignment of our financial structure with our international operational structure, as well as an increase in tax-exempt interest income. The decrease was offset by the fiscal 2005 non-deductible acquired research and development costs incurred in connection with our acquisition of Silicon MAGIKE. The impact of the non-deductible acquired research and development costs was 7.3%. Excluding this charge, the tax rate would have been 20.3%. We dont currently anticipate a significant change to this adjusted tax rate in fiscal 2006. In addition, the effective tax rates for each of the periods presented differ from the federal statutory rate of 35% due to the amount of income earned in foreign jurisdictions where the tax rate may be lower than the federal statutory rate, the impact of research and development tax credits, tax-exempt interest income and other permanent items.
The year over year increase in revenues in fiscal 2004 was primarily attributable to significant growth in both our mobile handset and broad-based mixed-signal product groups.
Mobile Handsets: Growth in the sales of our mobile handset products in fiscal 2004 were driven by increased unit volumes of our Aero Transceiver family of products reflecting the increased demand and market share gains driven largely by Asian mobile handset customers. Unit volumes of our mobile handset products increased year over year by 38.3%. In addition, average selling prices in this area increased year over year by 1.5%.
Broad-Based Mixed-Signal: Growth in the sales of our broad-based mixed-signal products in fiscal 2004 were primarily driven by increased unit volumes of our: (1) ISOmodems reflecting growth in demand and market share gains primarily in the set-top box and personal video recorder market; (2) microcontrollers, a new business that we acquired in the fourth quarter of fiscal 2003 which contributed revenues of $19.4 million in fiscal 2004; (3) ProSLICs reflecting growth in demand and market share gains in the voice-over-internet protocol (VoIP) market; and (4) DAAs reflecting growth in demand in voice applications, such as VoIP, and modems for personal computers. Unit volumes of broad-based mixed-signal products increased year over year by 18.1%. In addition, average selling prices in this area increased year over year by 18.7% reflecting the change in mix in this area towards higher priced items.
The year over year increase in gross profit dollars for fiscal 2004 was primarily due to the substantial increase in sales volumes in both our mobile handset and broad-based mixed-signal product groups. The increase in gross profit percentage in fiscal 2004 was primarily due to the absence of any significant one-time charges such as the $15.3 million charge associated with a patent litigation settlement recorded in fiscal 2003.
The year over year increase in research and development expense for fiscal 2004 was principally due to increased staffing, including personnel related to our acquisition of Cygnal, and associated occupancy and other costs to pursue new product development opportunities, and to continue to develop new testing methodologies for newly introduced and existing products.
The increase in the dollar amount of selling, general and administrative expense in fiscal 2004 was principally attributable to: (1) an increase of approximately $3.2 million for sales commissions and bonuses associated with our increased revenue levels; (2) an increase of approximately $3.1 million for personnel associated with our acquisition of Cygnal; (3) an increase of approximately $2.9 million for increased staffing and associated costs related to the expansion of our internal information technology and services support organization; (4) an increase of approximately $2.6 million for increased staffing and associated costs associated with the geographical expansion of our sales support organization in Asia and Europe; (5) an increase of approximately $2.4 million in legal, consulting and auditing fees which were primarily driven by activities related to the establishment of a headquarters for non-U.S. operations in Singapore and compliance with the requirements of Section 404 of the Sarbanes-Oxley Act; and (6) an increase of approximately $2.0 million for increased staffing and associated costs related to product marketing and marketing applications activities associated with our mobile handset products.
We wrote off in-process research and development in fiscal 2003 related to our acquisition of Cygnal. We did not have any such write-offs in fiscal 2004.
The increase in the dollar amount of interest income was due to a greater amount of cash and short-term investments balances during the year ended January 1, 2005 and due to an increase in the interest rates of the underlying instruments during fiscal 2004.
The increase in the dollar amount of interest expense in the most recent period was due to accrued interest associated with software license agreements.
The increase in the dollar amount of other income for the most recent period was primarily due to gains on the sale of test equipment.
The effective tax rates differ from the federal statutory rate of 35% due to the impact of research and development tax credits, state taxes, tax-exempt interest income and other permanent items.
We expect revenues in the first quarter of fiscal 2006 to be in the range of $110 million to $114 million. Furthermore, we expect our diluted net income per share to be in the range of $0.16 to $0.18.
Our principal sources of liquidity as of December 31, 2005 consisted of $363.7 million in cash, cash equivalents and short-term investments. Our short-term investments consist primarily of corporate and U.S. Government Agency debt securities.
Net cash provided by operating activities was $104.0 million during fiscal 2005, compared to net cash provided of $96.3 million during fiscal 2004. Operating cash flows during fiscal 2005 reflect our net income of $47.5 million, adjustments for depreciation, amortization, acquired research and development, and tax benefits associated with the exercise of stock options of $46.2 million, and a net decrease in the components of our working capital of $10.3 million.
Net cash provided by investing activities was $82.6 million during fiscal 2005, compared to net cash used of $119.1 million during fiscal 2004. The increase was principally due to an increase of $216.7 million in net sales and maturities of short-term investments, offset by a $15.2 million increase in net purchases of property, equipment and software and other assets, including a $13.3 million payment related to the acquisition of Silicon MAGIKE.
We anticipate capital expenditures of approximately $20 to 25 million for fiscal 2006. Additionally, as part of our growth strategy, we expect to evaluate opportunities to invest in or acquire other businesses, intellectual property or technologies that would complement or expand our current offerings, expand the breadth of our markets or enhance our technical capabilities.
Net cash provided by financing activities was $20.2 million during fiscal 2005, compared to net cash provided of $13.0 million during fiscal 2004. The increase in cash flows from financing activities during fiscal 2005 was principally due to higher proceeds from the exercise of employee stock options.
In our day-to-day business activities, we incur certain commitments to make future payments under contracts such as leases, purchase orders and other long-term contracts. Maturities under these contracts are set forth in the following table as of December 31, 2005, (in thousands):
(1) Operating lease obligations include amounts for leased facilities.
(2) Purchase obligations include contractual arrangements in the form of purchase orders with suppliers where there is a fixed non-cancelable payment schedule or minimum payments due with a reduced delivery schedule.
Our future capital requirements will depend on many factors, including the rate of sales growth, market acceptance of our products, the timing and extent of research and development projects, potential acquisitions of companies or technologies and the expansion of our sales and marketing activities. We believe our existing cash and short-term investment balances are sufficient to meet our capital requirements through at least the next 12 months, although we could be required, or could elect, to seek additional funding prior to that time. We may enter into acquisitions or strategic arrangements in the future which also could require us to seek additional equity or debt financing.
The preparation of financial statements and accompanying notes in conformity with U.S. generally accepted accounting principles requires that we make estimates and assumptions that affect the amounts reported. Changes in facts and circumstances could have a significant impact on the resulting estimated amounts included in the financial statements. We believe the following critical accounting policies affect our more complex judgments and estimates. We also have other policies that we consider to be key accounting policies, such as our policies for revenue recognition, including the deferral of revenues and cost of revenues on sales to distributors; however, these policies do not meet the definition of critical accounting estimates because they do not generally require us to make estimates or judgments that are difficult or subjective.
Allowance for doubtful accountsWe evaluate the collectibility of our accounts receivable based on a combination of factors. In circumstances where we are aware of a specific customers inability to meet its financial obligations to us, we record a specific allowance to reduce the net receivable to the amount we reasonably believe will be collected. For all other customers, we recognize allowances for doubtful accounts based on a variety of factors including the length of time the receivables are past their contractual due date, the current business environment, and our historical experience. If the financial condition of our customers were to deteriorate or if economic conditions worsened, additional allowances may be required in the future.
Inventory valuationWe assess the recoverability of inventories through an on-going review of inventory levels in relation to sales history, backlog and forecasts, product marketing plans and product life cycles. To address the difficult, subjective and complex area of judgment in determining appropriate inventory valuation in a consistent manner, we apply a set of methods, assumptions and estimates to arrive at the net inventory amount by completing the following: First, we identify any inventory that has been previously written down in prior periods. This inventory remains written down until sold, destroyed or otherwise disposed of. Second, we write down the inventory line items that may be slow moving or have some form of obsolescence due to non-conformance with electrical and mechanical standards as identified by our quality assurance personnel. Third, the remaining inventory not otherwise identified to be written down is compared to an assessment of product shipment history and forecasted demand, typically over the last six months and next six months, or actual firm backlog on hand. However, microcontroller product history and forecasted demand is typically measured over the last twelve months and next twelve months, respectively, due to the breadth of customers and markets served and longer product life cycles. Finally, the result of this methodology is compared against the product life cycle and competitive situations in the marketplace driving the outlook for the consumption of the inventory and the appropriateness of the resulting inventory levels. Demand for our products may fluctuate significantly over time, and actual demand and market conditions may be more or less favorable than those that we project. In the event that actual demand is lower or market conditions are worse than originally projected, additional inventory write-downs may be required.
Impairment of goodwill and other long-lived assetsWe review long-lived assets which are held and used, including fixed assets and purchased intangible assets, for impairment whenever changes in circumstances indicate that the carrying amount of the assets may not be recoverable. Such evaluations compare the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset over its expected useful life and are significantly impacted by estimates of future prices and volumes for our products, capital needs, economic trends and other factors which are inherently difficult to forecast. If the asset is considered to be impaired, we record an impairment charge equal to the amount by which the carrying value of the asset exceeds its fair value determined by either a quoted market price, if any, or a value determined by utilizing a discounted cash flow technique. Occasionally, we may hold certain assets for sale. In those cases, the assets are reclassified on our balance sheet from long-term to current, and the carrying value of such assets are reviewed and adjusted each period thereafter to the fair value less expected cost to sell.
We test our goodwill for impairment annually as of the first day of our fourth fiscal quarter and in interim periods if certain events occur indicating that the carrying value of goodwill may be impaired. The goodwill impairment test is a two-step process. The first step of the impairment analysis compares our fair value to our net book value. In determining fair value, the accounting guidance allows for the use of several valuation methodologies, although it states quoted market prices are the best evidence of fair value. If the fair value is less than the net book value, the second step of the analysis compares the implied fair value of our goodwill to its carrying amount. If the carrying amount of goodwill exceeds its implied fair value, we recognize an impairment loss equal to that excess amount.
Income taxesWe are required to estimate income taxes in each of the jurisdictions in which we operate. This process involves estimating the actual current tax liability together with assessing temporary differences in recognition of income (loss) for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included in our consolidated balance sheet. We then assess the likelihood that the deferred tax assets will be recovered from future taxable income and, to the extent we believe that recovery is not likely, we establish a valuation allowance against the deferred tax asset. Further, we operate within multiple taxing jurisdictions and are subject to audit in these jurisdictions. These audits can involve complex issues which may require an extended period of time to resolve and could result in additional assessments of income tax. We believe adequate provisions for income taxes have been made for all periods.
In December 2004, the FASB issued SFAS 123R. SFAS 123R addresses the accounting for share-based payments to employees, including grants of employee stock options. Under the new standard, companies will no longer be able to account for share-based compensation transactions using the intrinsic value method in accordance with Accounting Principles Board (APB) Opinion No. 25, Accounting for Stock Issued to Employees. Instead, companies will be required to account for such transactions using a fair-value method and recognize the expense in the consolidated statement of income. We expect to use the Black-Scholes option pricing model to determine the fair value of our stock-based awards. SFAS 123R requires companies to use either the modified-prospective or modified-retrospective transition method. We intend to use the modified-prospective transition method. Under this method, compensation cost is recognized for all awards granted, modified or settled after the adoption date as well as for any awards that were granted prior to the adoption date for which the requisite service has not yet been rendered. SFAS 123R was originally effective for reporting periods that began after June 15, 2005. In April 2005, the SEC announced the adoption of a new rule allowing companies to implement SFAS 123R at the beginning of their next fiscal year that begins after June 15, 2005. We intend to adopt SFAS 123R at the beginning of the first quarter of fiscal 2006. We expect that the adoption of SFAS 123R will have a significant negative impact on our results of operations, but will not impact our overall financial position. The impact of adoption of SFAS 123R cannot be predicted at this time because it will depend on levels of share-based payments granted in the future. However, had we adopted 123R in prior periods, the impact of that standard would have approximated the impact of SFAS 123 as described in the disclosure of pro forma net income and net income per share in Note 2 to our consolidated financial statements.
Our financial instruments include cash, cash equivalents and short-term investments. Our main investment objectives are the preservation of investment capital and the maximization of after-tax returns on our investment portfolio. Our interest income is sensitive to changes in the general level of U.S. interest rates. Based on our cash, cash equivalents and short-term investments holdings as of December 31, 2005, an immediate one-percentage point decline in the yield for such instruments would decrease our annual interest income by approximately $3.6 million. We believe that our investment policy is conservative, both in the duration of our investments and the credit quality of the investments we hold.
The Financial Statements and supplementary data required by this item are included in Part IV, Item 15 of this Form 10-K and are presented beginning on page F-1.
We have performed an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer (CEO) and Chief Financial Officer (CFO), of the effectiveness of our disclosure controls and procedures, as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the Exchange Act). Based on that evaluation, our management, including our CEO and CFO, concluded that our disclosure controls and procedures were effective as of December 31, 2005 to provide reasonable assurance that information required to be disclosed by us in the reports filed or submitted by us under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SECs rules and forms. There was no change in our internal controls during the fiscal quarter ended December 31, 2005 that materially affected, or is reasonably likely to materially affect, our internal controls over financial reporting.
Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control system was designed to provide reasonable assurance to our management and board of directors regarding the preparation and fair presentation of published financial statements.
Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2005. In making this assessment, it used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal ControlIntegrated Framework. Based on our assessment we believe that, as of December 31, 2005, our internal control over financial reporting is effective based on those criteria.
Our independent registered public accounting firm, Ernst & Young LLP, issued an attestation report on our assessment of our internal control over financial reporting. This report appears on page F-1.
Certain information required by Part III is omitted from this report because we intend to file a definitive Proxy Statement pursuant to Regulation 14A (the Proxy Statement) no later than 120 days after the end of the fiscal year covered by this report, and certain information to be included therein is incorporated herein by reference.
Set forth below is information regarding the executive officers and directors of Silicon Laboratories as of January 27, 2006.
Navdeep S. Sooch co-founded Silicon Laboratories in August 1996 and has served as Chairman of the Board since our inception. Mr. Sooch served as our Chief Executive Officer from our inception through the end of fiscal 2003 and served as interim Chief Executive Officer from April 2005 to September 2005. From March 1985 until founding Silicon Laboratories, Mr. Sooch held various positions at Crystal Semiconductor/Cirrus Logic, a designer and manufacturer of integrated circuits, including Vice President of Engineering, as well as Product Planning Manager of Strategic Marketing and Design Engineer. From May 1982 to March 1985, Mr. Sooch was a Design Engineer with AT&T Bell Labs. Mr. Sooch holds a B.S. in electrical engineering from the University of Michigan, Dearborn and a M.S. in electrical engineering from Stanford University.
Necip Sayiner has served as Director, President and Chief Executive Officer since September 2005. Prior to joining Silicon Laboratories, Mr. Sayiner held various leadership positions at Agere Systems Inc. From August 2004 to September 2005, Mr. Sayiner served as Vice President and General Manager of Ageres Enterprise and Networking Division and from March 2002 to August 2004 he served as Vice President and General Manager of Ageres Networking IC Division. Mr. Sayiner holds a B.S. in electrical engineering and physics from Bosphorus University in Turkey, a MS in electrical engineering from Southern Illinois University, and a Ph.D. in electrical engineering from the University of Pennsylvania.
Russell J. Brennan has served as our Vice President and Chief Financial Officer since September 2002. Mr. Brennan worked for Analog Devices, Inc., a designer and manufacturer of integrated circuits, from January 1988 to September 2002, where he most recently served as Vice President of Finance and Corporate Controller. From 1984 to 1988, Mr. Brennan served as Controller for the Analog Unit of Fairchild Semiconductor, a designer and manufacturer of semiconductors for multiple end market applications prior to its acquisition by National Semiconductor. From 1982 to 1984, Mr. Brennan served as Controller for Schlumberger We